Air and Water Leak Detector PosiTest Air

Leak detector to locate air and water leaks / different modes / internal memory for up to 200 measurement values / dust and water-resistant housing /

available free software / battery or mains power

The PosiTest Air leak detector can locate the smallest air and water leaks. In surface treatment, the PosiTest Air leak detector should be used to check for any type of leakage. The leak detector has various applications. For example, it can be used on walls, as well as on seals of various components. The leak detector can be used on single or double-layer membranes. Thanks to its different modes, the leak detector becomes a multifunctional device that can be used in both automatic and manual mode. When used in automatic mode, the device introduces pressure inside the test chamber once the user has set the pressure drop rate and the pressure drop limit. In manual mode, the user is responsible for regulating the pressure drop. The device's sensor is a high-precision pressure sensor, which is placed on the object to be measured during measurement. The number of leaks can be mitigated by using the leak detector. In this way, the leak detector can save costs and perform efficient work. Flexible operation is guaranteed by the fact that the leak detector can be powered by battery or mains. The measurement sensor is surrounded by a sealed test chamber with a diameter of 40 centimeters. If you choose this leak detector, there is no need to purchase additional accessories. The meter is supplied with the necessary components for measurement. Thus, you can start measuring as soon as you receive the leak detector.

- Different measurement modes

- Large test chamber

- Long and very flexible measuring tube

- Power supply by battery or mains

- Software libre PosiSoft 3.0

- Internal memory possibility

Technical specifications of the PosiTest Air leak detector

Differential pressure measurement range

100 ... 900 Pa

Pressure loss rate

5 ... 30 Pa per second

Large test chamber

Ø 40 cm

Resolution

1 Pa

Deviation in measurement

1 10% or 10 Pa

Power supply

battery or mains

Interfaz

USB

Cable length

1 1,5 m

Storage temperature of the leak detector.

-30 ... +65 0C

Leak detector operating temperature

-15 ... +50 0C

Usage temperature of the test solution

-30 ... +65 0C

Case dimensions

38 cm x 48,3 cm Ø

Peso

3,8 kg

Contents of the shipment of the PosiTest Air leak detector

1 x PosiTest Air leak detector 

1 x Very impact-resistant transparent test chamber

1 x Quick measurement tube for coupling 

1 x Power adapter

1 x Correa bandolera 

1 x Cable USB

4 x Test solutions (each 237 ml) with applicator