Calibration and Certification of Manometers

Pressure: 0 bar - 2 bar

Pressure: 1.6 bar - 25 bar

Pressure: 0 Pa - 900000 Pa

Applications Monitoring gas density of isolated cells in SF6 gas For installation inside and outside of SF6 gas insulated switchgear Features Tubular spring manometers with density transmitter ...

Pressure: 0 bar - 25 bar

Applications Monitoring gas density in closed cells with SF6 For internal or external installation in gas-insulated distribution cells with SF6FeaturesModified tubular spring manometer with transmitter...

Pressure: 250 Pa

Applications Monitoring of differential air pressure, and dry, clean non-aggressive gases Monitoring of filter pressure Monitoring of pressure in clean rooms Very low pressures Features ...

Pressure: 0 bar - 0.6 bar

Pressure: 0 Pa - 800 Pa

Pressure: 0 mbar - 45 mbar

Pressure: 0 Pa - 400 Pa

Pressure: 0 mbar - 1550 mbar

Pressure: 0 Pa - 150 Pa

Pressure: -1 bar - 400 bar

... switching points Output functions programmable via LED indication and optical buttons Connection of manometer or flush front process connection

... spring, made from profiled tubes of a special copper alloy, is welded to the threaded pin of the vacuum gauge- manometer, forming a single body with this; the other closed end, on the other hand, is released. ...

Pressure: 15000 psi

... operation between -10 °C to 50 °C. Multiple firmware modes make the XP2i more versatile than any other pressure indicator in the market. Pressure test mode of the safety valve operates the XP2i ...

Pressure: 10000 psi

The M1 is a digital test meter manufactured by Crystal Engineering. It replaces up to five mechanical meters 0.25%, each with a reading accuracy of 0.2%. The accuracy is inhibited by a drop, over the pressure, ...

El WT es un manometer Digital panel mount manufactured by Crystal pressure. This device is designed to replicate the dimensions, as well as the pressure connections of manometers of test ...

Pressure: 30000 Pa - 120000 Pa

The testo 511 measures absolute pressure with an accuracy of +/- hPa. If the altitude above sea level is entered, it functions as a barometer, which also allows the measurement of barometric altitude between two points. The testo ...

Pressure: 0 Pa - 10000 Pa

Measurement of differential pressure in HVAC filters or measurement of air velocity in the duct using the Pitot tube: with the easy-to-use testo 510 differential pressure meter, you will have a ...

Pressure: 0 Pa - 200000 Pa

... HOLD key. The minimum and maximum measured values can be displayed and stored in the instrument. The topsafe protects the manometer against shocks, dirt, and splashes.

Pressure: 0 Pa - 10000 Pa

Pressure: 0 Pa - 200000 Pa

Special flanges are available with drainage and ventilation outlets, sensors and manometers.

Pressure: 0 bar - 60 bar

Body materials ABS/Brass Class 1.6 Male BSP connection Measurement range 0/60 BAR

Pressure: 0 bar - 60 bar

Body Materials Stainless steel Class 1.6 Male BSP Connection Measurement range 0/60 BAR

Pressure: 0 bar - 10 bar

Stainless steel body materials Protection IP44 Male BSP 1/2" connection Measurement range 0/10 BAR

Pressure: 0 mbar - 600 mbar

Stainless Steel Body Materials Class 2.5 Male BSP Connection Measurement Range 0/600 BAR

Pressure: 0 bar - 250 bar

Body Materials Polycarbonate Class 0.25 Male BSP Connection Measurement Range 0/250 BAR

Pressure: 0 mbar - 2500 mbar

Pressure: -1 bar - 25 bar

Pressure: 0 bar - 60 bar

Pressure: 0 bar - 12 bar

Manometer Standard embedded series Tightening torque screws: Max. 0.6 Nm

Pressure: 0 bar - 10 bar

Body: technopolymer Sphere: acrylic pressure-mounted Accuracy: EN 837 class 1.6 - 2.5. ASME B40.1 Grade B Protection: IP 43

Pressure: 0 bar - 40 bar

Manometers made to be used with liquid or gaseous fluids that do not attack the copper alloy, do not have high viscosity, and do not crystallize.

Pressure: 0 bar - 1000 bar

Manometers with tubular spring DN 150 Made for liquid or gaseous fluids that do not deteriorate the copper alloy, do not have high viscosity, and do not crystallize.

Pressure: 0 bar - 1000 bar

Manometers with tubular spring series anti-vibration DN 100 Instruments designed for installation in electric power generation plants, pumps, presses, compressors, turbines, and refrigeration plants. With ...

Pressure: 0 bar - 400 bar

Manometer with tubular spring series anti-vibration DN 50 Instruments designed for installation in power generation plants, pumps, presses, compressors, turbines, diesel engines, chemical industries, ...

Pressure: 0 bar - 600 bar

Manometers with tubular spring anti-vibration series DN63 Instruments designed for installation in electric power generation plants, pumps, presses, compressors, turbines, Diesel engines, refrigeration plants ...

Pressure: 0 psi - 3 psi

Pressure: 0 psi - 160 psi

Pressure: 0 bar - 1600 bar

Pressure: 0.6 bar

Pressure: 0 bar - 25 bar

Pressure: 0 bar - 1600 bar

Pressure: 0 bar - 1000 bar

Pressure: 0.03 bar - 10 bar

Pressure: -1 bar - 2000 bar

Pressure: 0 bar - 400 bar

Pressure: 0 bar - 600 bar

Pressure: 0 bar - 2000 bar

Pressure: 0 bar - 600 bar

Pressure: 0 bar - 400 bar

Pressure: 0 bar - 400 bar

Pressure: 0 bar - 250 bar

Pressure: 0 bar - 600 bar

Pressure: 0 bar - 1000 bar

Pressure: 0 bar - 1000 bar

Pressure: 0 bar - 1600 bar

Pressure: 0 bar - 1600 bar

Pressure: 0 bar - 4000 bar

Pressure: -100 Pa - 600 Pa

MM The manometers Inclined capillary tube model MM are traditional and economical pressure gauges. Use The manometersInclined are good for measuring and indicating a small overpressure, ...

Pressure: -500 Pa - 500 Pa

Pressure: 0 Pa - 10000 Pa

Pressure: 0 Pa - 5000 Pa

Manometers differential pressure DPG The DPG is a manometerstandard for low pressure and differential pressure measurement. It is an improved alternative to the manometertradicional. Uso El ...