Colorimeter PCE-RGB 2

Spectral colorimeter for RGB or HSL color space / with two variants: online direct transmission colorimeter or handheld colorimeter with software and RS-232 interface

This colorimeter is based on the latest and most precise microsystem technology and operates according to the spectral method. A defined light source illuminates the test, and the light reflected from the surface is measured spectrally and displayed on the screen (PCE-RGB 2) of the colorimeter. This device can also measure luminous surfaces relatively, such as LCD screens. The measurement results with the PCE-RGB 2 colorimeter show the data on its indicator, but the data can also be transmitted to a PC with optional software for further evaluation. The application field of the device is very broad. It is used for objective quality control of colors in production (thus reducing the percentage of losses), in measuring and recording color in incoming goods control for QM systems according to DIN EN ISO 9000, for controlling color distances in color tests, for color standards, as well as for absolute color measurement.

- PCE-RGB 2 with external indicator (the RS-232 interface is located on the indicator / 

  you can additionally request the software package along with the RS-232 cable)

- Measurement of non-luminous surfaces such as paper, skin, fabric, paint ... the surfaces 

  bright as LCD screens can be measured relatively to each other

- RGB and HSL color space

- Calibration function using standard (the white standard is included in the shipment)

- Relative function that allows comparing various materials with each other

Technical specifications

Measurement geometry

Circular lighting at 45° / 0° for 45°

measurement for 0° according to DIN 5033

Measurement ranges

RGB: 0 ... 1023 for R, G, and B 

HSL: 0 ... 1,000 for H, S, and L

Resolution

1 for RGB measurement / 

0.001 for HSL measurement

Reproducibilidad

< 3 RGB, for a minimum of 10 measurements

Chromatic areas

RGB and HSL

Rango espectral

400 nm a 700 nm

Light source

2 white light diodes

Note: the color meter can also be used to measure non-fluorescent samples

Aplicaciones

- Non-luminous surfaces (absolute values)

- Superficies luminosas (mediciones relativas 

  where surfaces are compared to each other)

Indicador

Absolute and relative values

Interfaz

PCE-RGB 2: RS-232 on the indicator

Software

Optional PCE-RGB 2 software package

Power supply

9 V battery

Dimensions (sensor)

45 x 92 x 160 mm

Peso

PCE-RGB 2: aprox. 600 g

Condiciones ambientales

0 ... +50 °C / maximum 80 % relative humidity.

Normativa

DIN 5033

Contents of the shipment

1 x Colorimeter PCE-RGB 2

1 x Case

1 x User manual