The HD32.7 thermometer is a robust device with 8 inputs for temperature probes with complete Pt100 sensor modules and 4-wire probes. All connected probes are detected when the thermometer is turned on; after probes have been connected or disconnected, the instrument must be turned off and on again. The thermometer has a flash memory with 64 sections and a total capacity of 96,000 acquisitions for each of the 8 inputs. Memory can be managed in two ways: one when the available memory is full, the acquired data is overwritten starting from the oldest (circular memory), and the other when recording stops when the available memory is full. The thermometer can be connected to a PC via a multi-standard RS232 or USB2 serial port with automatic recognition. From the menu, it is possible to configure the recording and printing interval, the start and end date of the recording, and communication parameters. Data can be viewed on the PC using DeltaLog9 software.