DIN Rail Power Supply PS24V25AA

The PS24V14AA power supply unit is a high-quality switched power supply for DIN rail mounting. It features a compact and smart design, as well as a robust metal housing. The output voltage is easily adjustable (22 to 27 VDC), and it also has high stability with variations in temperature and load. In addition to short-circuit protection with 3 different output protection modes, it also has overload and surge protection at the output and a monitoring relay for high safety care. The parallel connection of PS24V14AA power supplies of the same type allows for easy output increase.

Single-phase input of 115 V AC to 230 V AC

Output: 24 V DC at 60 °C operating temperature

flexible output power of 480 watts up to 600 watts

Robust metal housing for DIN rail mounting

High overload without stopping

3 different protection modes for the output

Relay output for output voltage control

Product details

 

input:

nominal input voltage: 115 VAC to 230 VAC.

Input voltage: 90 VAC to 135 VAC (115 VAC); 170 VAC to 264 VAC (230 VAC)

Frequency range: 47 Hz to 63 Hz

Input current (Vn and under load) I²t: msec ≤ A ≤ 80.5

Input current (115 VAC to 230 VAC, at 40 °C): 8 A to 4.2 A

El control interno: T 10 A

External fuse (recommended): 16 A (B characteristic)

 

salida:

The factory-adjusted output voltage (Vn) +/- 3%: 24 VDC

adjustable output voltage range (Vadj): 22 VDC to 27 VDC

Start with a large load (capacitive load): ≤ 50,000 microfarads

Delay after power: 1 sec (max).

corriente continua a 24 V CC <40 ° C (In): 25 A (permanente)

corriente continua a 24 V CC <50 ° C (In): 22 A (permanente)

corriente continua a 24 V CC <60 ° C (In): 20 A (permanente)

current power impulse at 24 VDC / 60 °C (In): On (60 °C) x 1.5 ≥ 3 min.

Max Power in overload over 4 VDC. (Perm.): Imax = At 60 ° C x (1.8 to 2.2)

. Maximum short-circuit current (Icc): 60 A

Hypo mode; max. 2 seconds at 60 A

permanente; El modo continuo: 60 A

typically 20 milliseconds: (. VAC min) Hold-Up time Vn At 40 °C

Restante Ripple: ≤ 80 mVpp

Eficiencia: ≥ 90%

overheating protection: Yes, automatic shutdown of output

Module reset.

Short circuit protection on the output (via bridge):

A. restablecimiento manual

B. Modo Hipo

    (Cyclic clocking output to short-circuit elimination)

C. RESET cuando recreando el suministro

    (Output turns off will restart until the power supply)

Maximum power dissipation: 62 watts

Overload protection: Yes

Surge protection on the output: Yes (typical 35 V DC)

Possible parallel operation: Yes

Relé de salida se abre si la tensión de salida cae por debajo de 20 VDC +/- 5%. Max. 1 A @ 30 VDC / 60 VAC carga resistiva.

 

aislamiento:

isolation voltage input / output: 3000 VAC

Input / PE insulation voltage: 1605 VAC

voltage output Isolation / PE: 500 VAC

 

Standards and certifications:

CE in accordance with EMC 2004/108 / CE and the Low Voltage Directive 2006/95 / CE,

UL approval according to UL508, RoHS compliant

 

fiabilidad:

MTBF according to IEC 61709 > 500,000 hours

 

protection:

IP20

 

la vivienda:

Robust metal housing.

DIN rail mounting.

Dimensions (W): 85 mm x 120 mm x 140 mm

 

connection:

fixed terminal blocks for 4 mm² cross-section.

 

Humedad relativa:

max. 95% relative humidity at 25 °C, no condensation.

 

Temperatura ambiente:

Operation: -25 °C to 70 °C

(> 60 °C leads to a decrease in operating values of 2.5% / °C).

Almacenamiento: -40 ° C a 85 ° C.

 

peso:

750 g

 

Supply volume:

Device operating instructions.