Edge Oxygen Analyzer

analyzer with 3 different sensors for dissolved oxygen, pH, and conductivity / 

integrated temperature sensor / flat and very light / large LCD screen / 

two USB ports / charging station and electrode holder / GLP

The new and innovative Edge dissolved oxygen analyzer is slim and very lightweight, with a thickness of only 1.27 cm and a weight of 250 g. The Edge dissolved oxygen analyzer features an LCD screen with a diameter of almost 14 cm and an incredible viewing angle. With the Edge tester, measurements can be taken with 3 different sensors: pH, conductivity, and dissolved oxygen. These digital electrodes are automatically recognized and connect to the instrumentation simply via a 3.5 mm jack connector. The Edge electrodes are as advanced as the equipment itself: the built-in microchip stores the sensor type, ID, and calibration information, which will be retrieved automatically when the respective electrode is connected to the device. The Edge dissolved oxygen analyzer facilitates measurement, calibration, evaluation, recording, monitoring, and data transmission to a PC or USB stick. The Edge pH tester operates using Hanna's exclusive CAL-CHECK function. This alerts the user in case of an electrode defect, if it is dirty, and/or if the buffer solution is contaminated. Optionally, there is also the CAL-CHECK function for individual electrodes with Matching-Pin: it checks the pH electrode and diaphragm condition. The Edge is the result of years of experience and development: maximum functionality and innovative design.

Contents of the shipment

Kit pH HI 2020-02:

1 x edge oxygen analyzer, 1 x HI 11310 electrode, 1 x pH 4, pH 7, and pH 10 solution (2 packets of each), 1 x electrode cleaning solution, 1 x tabletop holder with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x user manual

Kit CE HI 2030-02:

1 x edge oxygen analyzer, 1 x HI 763100 conductivity probe, 1 x 1413 µS/cm and 12880 µS/cm conductivity solution (3 packets of each), 1 x tabletop stand with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x user manual

Kit OD HI 2040-02:

1 x edge oxygen analyzer, 1 x dissolved oxygen electrode HI 764080, 1 x filling electrolyte solution HI 7041S (30 ml), 2 x OD membranes, 2 x OD membrane seals, 1 x desktop stand with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x operating instructions

Electrodos (opcionales)

HI 11310: pH electrode, double junction, ceramic, refillable, with internal temperature sensor and spherical tip, 3.5 mm adapter and 1 meter cable

HI 11311: pH electrode, double junction, ceramic, refillable, with internal temperature sensor, spherical tip and matching pin, 3.5 mm adapter and 1 meter cable

HI 12300: pH electrode, double junction, gel electrolyte. PEI body, spherical tip with internal temperature sensor, 3.5 mm adapter and 1 m cable

HI 12301: pH electrode, double junction, gel electrolyte. PEI body, spherical tip, with internal temperature sensor and matching pin, 3.5 mm adapter and 1 m cable

HI 10530: pH electrode, single junction, triple ceramic, glass body, refillable, internal temperature sensor and conical tip, 3.5 mm adapter and 1 m cable

HI 10430: pH electrode, double junction, single ceramic, glass body, refillable, with internal temperature sensor and spherical tip, 3.5 mm adapter and 1 m cable

HI 763100: conductivity electrode with temperature sensor, 3.5 mm adapter and 1 m cable

HI 764080: dissolved oxygen electrode with temperature sensor, 3.5 mm adapter and 1 m cable