Electrocardiograph ECG 3 / 6-04 channels (automatic syndromic report + GSM)

AUTOMATIC EXTERNAL DEFIBRILLATOR DA-N-1 FOR GENERAL USE

The three/six channel electrocardiograph EKZTTs-3/6-04 "Axion" with microprocessor control and automatic ECG processing and transmission function through communication channels (GSM) is designed to measure and graphically record cardiac bioelectric potentials in diagnosing the state of the human cardiovascular system in medical institutions, medical centers of organizations, and in providing home medical assistance, in ambulances. 

Provides ECG extraction with simultaneous recording of 3/6/12 leads accepted, Cabrera leads and 3 Nebraska leads with the ability to print 3/6 leads on an integrated printer and 3/6/12 on an external printer + a function for ECG transmission via a GSM network + Automatic construction function of syndromic conclusion.

Three / six-channel electrocardiograph EK3TC-3 / 6-04 "AXION" with microprocessor control and automatic ECG processing (hereinafter referred to as electrocardiograph) is designed to measure and graphically record bioelectric potentials of the heart when diagnosing the state of the human cardiovascular system in hospitals, ambulances, health posts in organizations, as well as for home treatment. 

In ambulances. 



The electrocardiograph has the following operating modes: self-test, setup mode, manual ECG recording mode, automatic ECG recording mode, ECG recording in memory, ECG copy from memory mode, ECG transmission to PC, ECG transmission via GSM network.

Features

• Pacemaker detection
• Automatic measurement of ECG amplitude-time parameters.
• Construction of typical cardiocycles.
• ECG transfer to PC (USB)
• ECG transmission via GSM, GPRS
• Auto power off
• Patient data entry and information about health facilities.
• Automatic recording when arrhythmia is detected.
• Building rhythmograms, histograms, scatterograms during heart rate monitoring
• Defibrillation protection
• Interpretation of an electrocardiogram (syndromic conclusion) (option)
• Audible indication of heart rate
• Sound level adjustment
• LED indication for AC power source, battery charge, filter status, electrode contact failure, absence of thermal paper
• Synchronous recording in automatic mode.
• Automatic and manual operation.
• ECG signal filters: network interference, antemember, drift
• Grid printing
• Connection of an external AT keyboard and a laser printer
• Protection against electric shock - Class II, Type GF

Parameters

Procesamiento       Sampling frequency 4 kHz / channel 

Input voltage range of 0.03 to 10 mV 

Measurement error in the range: 

                                             - from 0.5 to 10 mV +/- 25 mkV 



                                             - from 0.05 to 0.5 mV +/-5% 

ADC 24 bit 

HR Measurement range of 30 to 300 bpm

Common mode rejection of more than 100 dB 

Recording medium speed 5; 10; 12,5; 25 and 50 mm / sec. 

Sensibilidad 2,5; 5; 10; 20; 40 mm / mV 

Recorded frequency range from 0.05 to 150 Hz 

Pantalla 

Screen resolution 640x480 pixels 

Number of conductors on the display 3/6/12 

Touchscreen size 14 cm diagonal TFT color display (5.7")

Alphanumeric keyboard display on screen             

Screen Brightness control screen 

Power supply 

AC from 198 to 242 V 

Removable battery 14.8 V max. Source of power supply of 

vehicle from 10.5 to 15 V 

Number of ECG recorded with a fully charged battery at least 100 

Battery charging time 5 h max

Rechargeable lithium-ion battery type 

Grabadora 

recording medium of thermal paper 112 mm wide,  foldable rolls and zigzag 

data program print type, version, time and date,   Sweep speed, sensitivity, cable name, filter status 

Impresora 

thermal built-in printer, resolution 

- dpmm, Vertical / Horizontal 8/16 

Operating conditions 

Тemperature                                                                         

- when operating from +10 to +40 °C 

- during transport from -20 to +50 °C 

Humidity 95% max. 

Pressure from 84 to 107 kPA 

Features generales 

Internal memory designed for 100 ECGs 

External memory card with external memory of 16 Gb,microSD memory card type up to 16 Gb. ECG recording in 12 standard sequence, Cabrera, 

cables and additional options. Neb, recording time user selectable in automatic mode 3, 4, 6, 8, 10 sec or 4 RR intervals 

Escritura anticipada 1 , 2, 3 seg. 

Timer start from 1 to 59 min. 

Degree of protection against electric shock CF.

Protection class against electric shock I 

Dimensions 265х195х70 mm 

Weight 1.5 kg max. 

Funciones 

Pacemaker detection 

Automatic measurement of ECG amplitude-time parameters 

Construction of typical cardiocycles 

ECG data transmission to PC (USB) 

ECG transmission via GSM, GPRS network Entrada automatic 

of data and patient information in health centers. Record Automatic upon detecting arrhythmias.

Construction of rhythmogram, histogram, scatterogram during HR monitoring 

Defibrillation protection 

ECG interpretation (syndromic report) (optional) 

HR audible indication 

Acoustic signal level adjustment Indicador luminoso 

AC power supply, battery charge status, filter status, loose electrode, thermopaper, synchronized recording in mode 

automatic Automatic and manual operating modes 

ECG signal filters: power disturbances, tremor, drift 

Grid printing 

Connection of an external laser printer and AT keyboard 

Accesorios 

Electrocardipgraph 

Patient cable Cable of 

power supply 

Set of reusable electrodes 

Transport bag for transport.

Set of operational documentation 

The initial set of consumables (2 rolls of thermal paper)

More information: