FLUKE 724 Calibrator

Fluke 724 temperature calibrator

The Fluke 724 temperature calibrator is a very powerful yet easy-to-use device. The temperature calibrator can measure RTD, thermocouples, ohms, and volts to check sensors and transmitters. Additionally, the temperature calibrator can also generate and simulate thermocouples, RTD, volts, and ohms to calibrate transmitters. Therefore, with the Fluke 724 temperature calibrator, you can calibrate almost any temperature device. The dual-line display allows you to see the temperature and loop current simultaneously.

- Measures RTD, thermocouples, ohms, and volts to check sensors and transmitters

- Generates/simulates thermocouples, RTD, volts, and ohms to calibrate transmitters

- Perform quick linearity tests with increments of 25% and 100%

- Perform remote tests with automatic step and ramp

- Power transmitters during testing with loop power supply with

   simultaneous measurement of mA

- Stores the most common test configurations for future activation

  calibraciones

- Small dimensions and easy to transport

- Robust and reliable design, suitable for use on-site

- The backlight allows operation in poor lighting conditions

- High-capacity battery with 4 AA batteries

- Battery compartment cover for easy replacement

Measurement precision

DC voltage

30,000 V 0,02%+ 2 cuentas (pantalla superior)

20,000 V 0,02%+ 2 cuentas (pantalla inferior)

100,00 mV 0,02% + 2 cuentas

-10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)

Corriente CC

24,000 mA 0,02%+2 cuentas

Resistencia

0.0 to 400.0 Ω 0.1 Ω (4 wires), 0.15 Ω (2 and 3 wires)

401 to 1,500 Ω 0.5 Ω (4 wires), 1 Ω (2 and 3 wires)

1,500 to 3,200 Ω 1 W (4 wires), 1.5 Ω (2 and 3 wires)

Generation accuracy

DC voltage

100,00 mV 0,02% + 2 cuentas

10,000 V 0,02% + 2 cuentas

-10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)

Resistencia

15.0 to 400.0 Ω 0.15 Ω (excitation current from 0.15 to 0.5 mA)

401 to 1,500 Ω 0.5 Ω (excitation current of 0.05 to 0.8 mA)

1,500 to 3,200 Ω 1 Ω (excitation current of 0.05 to 0.4 mA)

RTD and thermocouples

Measurement accuracy

NI-120 0,2 °C

PT-100 (385) 0,33 °C

PT-100 (393) 0,3 °C

PT-100 (JIS) 0,3 °C

PT-200 (385) 0,2 °C

PT-500 (385) 0,3 °C

PT-1000 (385) 0,2 °C

Resolution: 0.1°C

J: 0,7 °C

K: 0,8 °C

T: 0,8 °C

E: 0,7 °C

R: 1,8 °C

S: 1,5 °C

B: 1,4 °C

L: 0,7 °C

U: 0,75 °C

N: 0,9 °C

Resolution J, K, T, E, L, N, U: 0.1 °C; B, R, S: 1 °C

XK 0.6°C

BP 1.2°C

Generation accuracy

NI-120 0,2 °C

PT-100 (385) 0,33 °C

PT-100 (393) 0,3 °C

PT-100 (JIS) 0,3 °C

PT-200 (385) 0,2 °C

PT-500 (385) 0,3 °C

PT-1000 (385) 0,2 °C

Resolution: 0.1°C

Note: Accuracy established for 4-wire measurements.

J: 0,7 °C

K: 0,8 °C

T: 0,8 °C

E: 0,7 °C

R: 1,4 °C

S: 1,5 °C

B: 1,4 °C

L: 0,7 °C

U: 0,75 °C

N: 0,9 °C

Resolution J, K, T, E, L, N, U: 0.1 °C B, R, S: 1 °C

XK 0.6°C

BP 1.2°C

Technical specifications

Ramp functions

Generation functions: Voltage, current, resistance, frequency, temperature

Ramps: Slow ramp, fast ramp, 25% increment ramp

Loop power function

Voltage: 24 V

Exactitud: 10%

Maximum current: 22 mA, short-circuit protected

Increment functions

Generation functions: Voltage, current, resistance, frequency, temperature

Increments: 25% of range, 100% of range

Working temperature

-10 ... +55 ºC

Storage temperature

-20 ... +71 ºC

Relative humidity (non-condensing)

90% (10ºC a 30ºC)

75% (30ºC a 40ºC)

45% (40ºC a 50ºC)

35% (50ºC a 55ºC)

not controlled < 10 ºC

Altitud

3.000 m

Safety classification

CSA C22.2 No. 1010.1:1992

EMC

EN50082-1:1992 and EN55022:1994 Class B

Dimensions

96 x 200 x 47 mm

Peso

650 g

Power supply

4 Pilas alcalinas AA

Battery life

Aprox. 25 h

Vibration

Aleatoria 2 g, 5 - 500 Hz

Contents of the shipment

1 x Fluke 724 temperature calibrator

1 x Set of AC70A alligator clips

1 x Set of stackable test leads

1 x TL75 measurement cable set

1 x Instruction Manual