FLUKE 725 Calibrator

Fluke 725 multifunction process calibrator

The Fluke 725 multifunction process calibrator has been specifically designed for the process industry, with unmatched features and precision. The Fluke 725 multifunction process calibrator can measure and generate almost all process parameters, in addition to calibrating virtually any device. The Fluke 725 multifunction process calibrator can also interpret results without the help of a calculator and store measurements for later analysis.

- Small dimensions and easy to transport

- Robust and reliable design, suitable for use on-site

- The easy-to-read measurement/generation display allows simultaneous viewing of the 

  input and output values

- Measures volts, mA, RTD, thermocouples, frequency, and ohms to check sensors and

  transmisores

- Generates/simulates volts, mA, thermocouples, RTD, frequency, ohms, and pressure for calibration

  transmisores

- Measures/generates pressure using any of the 29 Fluke 700Pxx pressure modules

- Generates mA with simultaneous pressure measurement for valve checks

  and I/P

- Supports the checking of flow meters with frequency and CPM functions

- Performs quick linearity checks with increment and ramp functions

  automatic

- During the check, power the power transmitters using the power supply 

  loop with simultaneous mA measurement

- Supports fast pulse RTD transmitters and PLC, with pulses of only 10 ms

- Allows saving of frequently used check settings for

  emplearlas posteriormente

- The backlight allows operation in poor lighting conditions

- High-capacity battery with four AA batteries

Measurement accuracy

DC voltage

30,000 V 0,02%+ 2 cuentas (pantalla superior)

30,000 V 0,02%+ 2 cuentas (pantalla inferior)

100,00 mV 0,02% + 2 cuentas

-10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)

Corriente CC

24,000 mA 0,01%+2 cuentas

Resistencia

0.0 to 400.0 Ω 0.1 Ω (4 wires), 0.15 Ω (2 and 3 wires)

401 to 1,500 Ω 0.5 Ω (4 wires), 1 Ω (2 and 3 wires)

1,500 to 3,200 Ω 1 W (4 wires), 1.5 Ω (2 and 3 wires)

Frecuencia

2,0 a 1.000,0 CPM 0,05% + 1 cuenta

1,0 a 1.100,0 Hz 0,05% + 1 cuenta

1,00 a 10,00 kHz 0,05% + 1 cuenta

Minimum sensitivity 1 V peak to peak

Pressure

Accuracy of 0.025% of the range using any of the 29 pressure modules. (for detailed specifications, refer to the pressure modules in the options and accessories section) Modules available for differential, barometric, vacuum, absolute, dual, and high pressure.

Generation accuracy

DC voltage

100,00 mV 0,02% + 2 cuentas

10,000 V 0,02% + 2 cuentas

-10.00 mV to 75.00 mV 0.025% + 1 count (through TC connector)

Corriente CC

24,000 mA (Generation) 0.02% + 2 counts

24,000 mA (Simulation) 0.02% + 2 counts

Resistencia

15.0 to 400.0 Ω 0.15 Ω (excitation current of 0.15 to 0.5 mA), 0.1 Ω (excitation current of 0.5 to 2 mA)

401 to 1,500 Ω 0.5 Ω (excitation current of 0.05 to 0.8 mA)

1,500 to 3,200 Ω 1 Ω (excitation current of 0.05 to 0.4 mA)

Frecuencia

2,0 a 1.000,0 CPM 0.05%

1,0 a 1.100,0 Hz 0.05%

1,00 a 10,00 kHz 0.25%

Waveform: square wave of 5 V p-p, deviation of -0.1 V

RTD and thermocouples

Measurement accuracy

NI-120 0,2 °C

PT-100 (385) 0,33 °C

PT-100 (393) 0,3 °C

PT-100 (JIS) 0,3 °C

PT-200 (385) 0,2 °C

PT-500 (385) 0,3 °C

PT-1000 (385) 0,2 °C

Resolution: 0.1°C

J: 0,7 °C

K: 0,8 °C

T: 0,8 °C

E: 0,7 °C

R: 1,8 °C

S: 1,5 °C

B: 1,4 °C

L: 0,7 °C

U: 0,75 °C

N: 0,9 °C

Resolution J, K, T, E, L, N, U: 0.1 °C; B, R, S: 1 °C

XK 0.6°C

BP 1.2°C

Generation accuracy

NI-120 0,2 °C

PT-100 (385) 0,33 °C

PT-100 (393) 0,3 °C

PT-100 (JIS) 0,3 °C

PT-200 (385) 0,2 °C

PT-500 (385) 0,3 °C

PT-1000 (385) 0,2 °C

Resolution: 0.1°C

Note: Accuracy established for 4-wire measurements.

J: 0,7 °C

K: 0,8 °C

T: 0,8 °C

E: 0,7 °C

R: 1,4 °C

S: 1,5 °C

B: 1,4 °C

L: 0,7 °C

U: 0,75 °C

N: 0,9 °C

Resolution J, K, T, E, L, N, U: 0.1 °C B, R, S: 1 °C

XK 0.6°C

BP 1.2°C

Technical specifications

Ramp functions

Generation functions: Voltage, current, resistance, frequency, temperature

Ramps: Slow ramp, fast ramp, 25% increment ramp

Loop power function

Voltage: 24 V

Exactitud: 10%

Maximum current: 22 mA, short-circuit protected

Increment functions

Generation functions: Voltage, current, resistance, frequency, temperature

Increments: 25% of range, 100% of range

Working temperature

-10 ... +55 ºC

Storage temperature

-20 ... +71 ºC

Working altitude

3.000 m

Complies with

EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No. 1010.1:1992

Dimensions

130 x 236 x 61 mm

Peso

650 g

Power supply

4 Pilas alcalinas AA

Battery replacement

Independent battery compartment, accessible without breaking the calibration seal

Side port connections

Pressure module connector, also used for real-time remote programming

Contents of the shipment

1 x Fluke 725 multifunction process calibrator

1 x Set of AC72 crocodile clips

1 x Set of stackable test leads

1 x TL 75 measurement cable set

1 x Instruction Manual