Ground installation tester PCE-ITE 50

$ 1,350.00

Pedido N° ref.: PCE-ITE 50

Shipping: throughout Latin America Delivery time: Inquire

View list de Comprobador PCE See Checker in other brands

View products PCE Buy

installation tester resistant / insulation resistance /

ground resistance / loop impedance / voltage measurement /

Low impedance measurement / DDR test

The PCE-ITE 50 is a robust installation tester, equipped with a large 3.5" color TFT-LCD screen. The PCE-ITE 50 installation tester offers various measurement modes, such as insulation resistance, earth resistance, loop impedance, voltage, low ohm measurements, and DDR testing with camera function, as well as the possibility to document the measurement with corresponding photos. With the DT-6650 installation tester, you can ensure that fixed installations are installed safely and correctly. Thanks to its dual display, intuitive symbols, and high visibility, you can perform measurements comfortably and quickly. With the low-frequency ohmmeter of the DT-6650 installation tester, you can check ground connections, equipotential bonding bars, and protective conductors at a low ohm frequency. The low ohm measurement range of the DT-6650 installation tester is 0...2000 Ω with a resolution of 0.001...1 Ω. The most important measurement of the DT-6650 installation tester is the insulation resistance measurement. In insulation measurements, electrical lines are subjected to voltage to allow leakage currents to flow, which usually generate heat. In most cases, leakage currents are so minimal that they are often not detected by safety devices; potentially causing a fire in the worst case. The DT-6650 installation tester can measure installations with a test voltage of 125 V, 250 V, 500 V, or 1000 V. The test current is usually 1 mA. The earth measurement of the DT-6650 installation tester is performed independently of the power supply. To connect all installations and circuits of a power system to a common potential and to protect against short circuits and overvoltages, the earth resistance should have as low an impedance as possible. With a measurement range of 0...2000 Ω and a resolution of 0.01...1 Ω, the DT-6650 installation tester therefore offers all the conditions for a significant measurement of earth resistance.

- 3.5" color TFT LCD display

- Loop resistance LN, L-PE and N-PE

- Adjustable FI test current

- SD card and Bluetooth

- Ground measurement

- Prueba FI bueno/malo

- Low impedance measurement

- Voltage at terminals up to 1000 V

Technical specifications

Insulation test
Voltage at terminals	Measuring range:	Resolution	Accuracy	Test current	Current of cortocircuito
125 V (0 ... 10 %)	0,125 ... 4 MΩ	0,001 MΩ	± (2 % + 10 digits)	1 mA @ Last 125 kO	<= 1 mA
	4,001 ... 40 MΩ	0,01 MΩ	± (2 % + 10 digits)
	40,01 ... 400 MΩ	0,1 MΩ	± (4 % + 5 digits).
	400,1 ... 1000 MΩ	1 MΩ	± (5 % + 5 digits)
250 V (0 ... 10 %)	0,125 ... 4 MΩ	0,001 MΩ	± (2 % + 10 digits)	1 mA @ Last 250 kO	<= 1 mA
	4,001 ... 40 MΩ	0,01 MΩ	± (2 % + 10 digits)
	40,01 ... 400 MΩ	0,1 MΩ	± (3 % + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (3 % + 2 digits)
500 V (0 ... 10 %)	0,125 ... 4 MΩ	0,001 MΩ	± (2 % + 10 digits)	1 mA @ Last 500 kO	<= 1 mA
	4,001 ... 40 MΩ	0,01 MΩ	± (2 % + 10 digits)
	40,01 ... 400 MΩ	0,1 MΩ	± (3 % + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (4 % + 5 digits).
1000 V (0 ... 10 %)	0,125 ... 4 MΩ	0,001 MΩ	± (3 % + 10 digits)	1 mA @ Last 1 MO	<= 1 mA
	4,001 ... 40 MΩ	0,01 MΩ	± (2 % + 10 digits)
	40,01 ... 400 MΩ	0,1 MΩ	± (3 % + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (4 % + 5 digits).
Low Ohm / low ohm measurement
Measuring range:	Resolution	Accuracy		max. voltage open circuit	Overload protection
2,000 Ω	0,001 Ω	± (1.5 % + 30 digits)		5,8 V	250 Vrms
20,00 Ω	0,01 Ω	± (1.5 % + 3 digits)		5,8 V	250 Vrms
200,0 Ω	0,1 Ω	± (1.5 % + 3 digits)		5,8 V	250 Vrms
2000 Ω	1 Ω	± (1.5 % + 5 digits)		5,8 V	250 Vrms
Transit checker
Measuring range:	Resolution		max. voltage open circuit	Overload protection	Current of cortocircuito
2000 Ω	0,01 Ω		5,8 V	250 Vrms	>= 200 mA
Loop resistance
L-PE (Hi-Amp): Test current 4.0 A
Measuring range:		Resolution		Accuracy
0,23 ... 9,99 Ω		0,01 Ω		± (4% + 4 digits)
10,0 ... 99,9 Ω		0,1 Ω		± (4% + 4 digits)
100 ... 999 Ω		1 Ω		± (4% + 4 digits)
L-PE (without resolution): Test current 15 mA
Measuring range:		Resolution		Accuracy
0,23 ... 9,99 Ω		0,01 Ω		± (5 % + 6 digits)
10,0 ... 99,9 Ω		0,1 Ω		± (5 % + 6 digits)
100 ... 999 Ω		1 Ω		± (5 % + 6 digits)
L-N: Test current 4.0 A
Measuring range:		Resolution		Accuracy
0,23 ... 9,99 Ω		0,01 Ω		± (4% + 4 digits)
10,0 ... 99,9 Ω		0,1 Ω		± (4% + 4 digits)
100 ... 999 Ω		1 Ω		± (4% + 4 digits)
Prueba RCD
RCD (In)			10 mA, 30 mA, 100 mA, 300 mA 650 mA, 1 A
Factores			x 1/2, x1, x2, x5
Accuracy in operating time			± (1 % + 1 ms)
Test current waveform			Sinus (CA), Puls (CC)
Resolution features			G and S
Time resolution point.			0 º or 180 º
Voltage range			194...260 V AC (50/60 Hz)
Current measurement accuracy			± (5 % + 2 digits)
Voltage measurement
Measuring range:		Resolution		Accuracy
80 ... 500 V CA/CC		1 V		± (2 % + 2 digits)
Frequency measurement
Measuring range:		Resolution		Accuracy
45...65 Hz		1 Hz		12 Hz
Ground measurement
Measuring range:		Resolution		Accuracy
0,00...99,99 Ω		0,01 Ω		± (2 % + 30 digits)
100,0...999,9 Ω		0,1 Ω		± (2 % + 6 digits)
1000...2000 Ω		1 Ω		± (2 % + 6 digits)
Specifications generales
Power supply			8 x 1.2...1.5 V AA batteries
Tiempo operativo			aprox. 15 h
Measurement category			CAT III 600 V
Type of protection			IP 65
Pantalla			3.5" TFT (320 x 240 pixels)
Condiciones ambientales			0...45 ºC 0...95 % H.r., non-condensing
Dimensions			24,2 cm x 10,5 cm x 14,5 cm
Peso			1,56 kg

Contents of the shipment

1 x Installation tester PCE-ITE 50

1 x Correa

3 x Alligator clips

3 x Test leads

1 x High voltage test probe

1 x Adapter to connect to power

1 x Charger with interchangeable plugs of type C, A, G, and I

1 x Charger with vehicle adapter

8 x 1.2 V 2450 mAh NiMH batteries (AA type)

1 x Case

1 x User manual

Recomendaciones:

Kit of 4 picas

Kit of 4 metal probes for the DT-6650 Kit of 4 metal probes for the DT-6650 … 30 US$

INCLUYE:

** 2-year warranty.

** Discounts for the sale of two or more ground installation testers.

** Metrological calibration certificate for Ground installation tester.

** Preventive maintenance, corrective (repair), technical service, and spare parts.

** Sales, maintenance, calibration, certification, and technical service 24 hours.

***Envios a: Argentina, Bolivia, Brasil, Chile, Colombia, Costa, Rica, Cuba, Ecuador, El Salvador,

Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Dominican Republic,

Uruguay ,Venezuela.

Quick contact: ventas@equinlabsac.live info@equinlabsac.live

Price: $ 1,350.00

Catalog:

Installation Tester

You are here

Ground installation tester PCE-ITE 50

Recomendaciones:

Calibration certificate of Earth Installation Tester

Kit of 4 picas

INCLUYE:

Quick contact: ventas@equinlabsac.live info@equinlabsac.live