Hanna edge HI 2040-02 Conductivity Meter

$ 1,400.00

Pedido N° ref.: edge HI 2040-02

Shipping: throughout Latin America Delivery time: Inquire

View list de Conductimetro HANNA See Conductivity Meter in other brands

View products HANNA Buy

conductivity meter / 3 different sensors for pH, conductivity, and oxygen /

integrated temperature sensor / flat and very light / large LCD screen /

two USB ports / electrode holder station / GLP

The new and innovative edge conductivity meter is thin and very lightweight, with a thickness of only 1.27 cm and a weight of 250 g. The edge conductivity meter has an LCD screen with a diameter of almost 14 cm and an incredible viewing angle. The Edge conductivity meter can be completed with 3 different sensors: pH, conductivity, and oxygen. These digital electrodes are automatically recognized and connect to the device simply via a 3.5 mm jack connector. The edge electrodes are as advanced as the edge itself: the built-in microchip stores the sensor type, ID, and calibration information, which will be automatically retrieved when the respective electrode is connected to the device. The edge conductivity meter facilitates measurement, calibration, evaluation, recording, monitoring, and data transmission to a PC or USB stick. The edge pH meter operates using Hanna's exclusive CAL-CHECK function. This alerts the user in case there is a defect in the electrode, that it is dirty, and/or that the buffer solution is contaminated. Optionally, there is also the CAL-CHECK function for individual electrodes with Matching-Pin: it checks the pH electrode and diaphragm condition. The edge is the result of Hanna's years of experience and development: maximum functionality and an innovative design.

- 3 electrodes: pH, conductivity, and oxygen - Integrated temperature sensor - Fine and very lightweight - Gran pantalla LCD - Dos puertos USB - Charging station and electrode holder
Technical features
pH
Measurement range	Basic mode: -2.000 ... 16.000 pH Standard mode: ±1000.0 mV for pH
Resolution	0.01 and 0.001 pH.
Accuracy (at 25 °C)	±0,002 pH
Calibration point	Standard mode: 5 points Basic mode: 3 points
Temperature compensation	ATC (-20 ... +120 °C)
Electrode diagnosis	Standard mode: probe condition, response time, and out-of-calibration range
Conductividad
Measurement range	0,00 µS/cm ... 500 mS/cm
Resolution	0,01 µS/cm; 0,1 µS/cm; 1 µS/cm; 0,01 mS/cm; 0,1 mS/cm
Accuracy	±1% of the measurement value
Calibration	1 offset calibration point
Temperature compensation	Automatic or manual ATC
Factor TDS	0,40 ... 0,80
Dissolved oxygen
Measurement range	0.00...45.00ppm 0.0 ... 300 % oxygen saturation
Resolution	0.01 ppm; 0.1 % saturation
Accuracy	±1.5% of the measurement value
Calibration point	1 or 2 points at 0% (solution HI 7040) and 100 % (en aire)
Temperature compensation	ATC (0 ... +50 °C)
Salinity compensation	0 ... 40 g/l
Altitude compensation	-500 ... 4000 m
Temperatura
Measurement range	-20 ... +120 °C
Resolution	0,1 °C
Accuracy	±0,2 °C
Specifications adicionales
Memoria	Up to 1000 records: 200 records (on demand and stability records); 600 records with logging interval
Conectividad	1 x USB, 1 x micro USB
Condiciones ambientales	0 ... +50 °C; max. 95 % RH.
Power supply	Adaptador 5 V DC (incluido)
Size	202 x 140 x 12,7 mm
Peso	Aprox. 250 g

Contents of the shipment

Kit pH HI 2020-02:

1 x edge conductivity meter, 1 x HI 11310 electrode, 1 x pH 4, pH 7, and pH 10 solution (2 packets of each), 1 x electrode cleaning solution, 1 x tabletop stand with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x user manual

Kit CE HI 2030-02:

1 x edge conductivity meter, 1 x HI 763100 conductivity probe, 1 x conductivity solution 1413 µS/cm and 12880 µS/cm (3 packets of each), 1 x tabletop stand with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x user manual

Kit OD HI 2040-02:

1 x edge conductivity meter, 1 x dissolved oxygen electrode HI 764080, 1 x filling electrolyte solution HI 7041S (30 ml), 2 x OD membranes, 2 x OD membrane seals, 1 x tabletop holder with electrode holder, 1 x wall mount, 1 x USB cable, 1 x 5 V power supply, 1 x user manual

Electrodos (opcionales)

HI 11310: pH electrode, double junction, ceramic, refillable, with internal temperature sensor and spherical tip, 3.5 mm adapter and 1 meter cable

HI 11311: pH electrode, double junction, ceramic, refillable, with internal temperature sensor, spherical tip and matching pin, 3.5 mm adapter and 1 meter cable

HI 12300: pH electrode, double junction, gel electrolyte. PEI body, spherical tip with internal temperature sensor, 3.5 mm adapter and 1 m cable

HI 12301: pH electrode, double junction, gel electrolyte. PEI body, spherical tip, with internal temperature sensor and matching pin, 3.5 mm adapter and 1 m cable

HI 10530: pH electrode, single junction, triple ceramic, glass body, refillable, internal temperature sensor and conical tip, 3.5 mm adapter and 1 m cable

HI 10430: pH electrode, double junction, single ceramic, glass body, refillable, with internal temperature sensor and spherical tip, 3.5 mm adapter and 1 m cable

HI 763100: conductivity electrode with temperature sensor, 3.5 mm adapter and 1 m cable

HI 764080: dissolved oxygen electrode with temperature sensor, 3.5 mm adapter and 1 m cable