Hanna HI 9835 Conductivity Meter

Conductivity meter, waterproof, for conductivity, TDS, salinity, and temperature

With the HI 9835 conductivity meter, both conductivity in µS/cm or in ppm (mg/l TDS measurement range), as well as salinity (NaCl) in % and temperature can be measured. All measurement values can be displayed on the conductivity meter with automatic or manual temperature compensation. The temperature coefficient can be selected between 0.0 and 6.0% and the TDS factor can be adjusted between 0.80 (F1) and 0.40 (F2). 

The HI 9835 conductivity meter features a waterproof body and can be used in the field or in the laboratory.

The conductivity meter is equipped with a very large and easily readable display that explains calibration with easily understandable symbols. 

Alongside conductivity fields, the temperature of the solution is displayed. The device has an automatic shutdown after 10 minutes if it is not in use.

- rubber-coated keys 

- waterproof body 

- electrodo reemplazable 

- gran pantalla 

- good price / quality ratio

Technical data

Measurement fields

Temperatura

–20,0 ... 120,0 ºC

Conductividad EC

0,00...29,99 µS/cm; 30,0...299,9 µS/cm

300...2999 µS/cm; 3,00...29,99 mS/cm

30,0...200,0 mS/cm; 200,0...500,0 mS/cm

Salinidad TDS

0,00...14,99 ppm (mg/l); 15,0...149,9 ppm (mg/l)

150...1499 ppm (mg/l); 1,50...14,99 ppt (g/l)

15,0...100,0 ppt (g/l); 100,0...400,0 ppt (g/l)

NaCl

0,0 ... 400,0 %

Resolution

Temperatura

0,1 °C

Conductividad EC

0,01 µS/cm; 0,1 µS/cm; 1 µS/cm;

0,01 mS/cm; 0,1 mS/cm

Salinidad TDS

0,01 ppm; 0,1 ppm; 1 ppm; 0,01 ppt; 0,1 ppt

NaCl

0,1 %

Accuracy (at 20°C)

Temperatura

± 0,4 °C

Conductividad EC

± 1% of the indicated value

Salinidad TDS

± 1% of the indicated value

NaCl

± 1% of the indicated value

Calibration

Temperatura

2-point calibration, at 0 and 50 ºC

Conductividad EC

1 punto (con 6 tampones registrados)

Factor TDS

Adjustable between 0.40 and 0.80

NaCl

1 point with optional solution (HI 7037)

Temperature compensation

Automatic or manual from 20.0 ... 120 °C

Electrodo

HI 76309; 4-ring probe with integrated thermal sensor, connected to a 1 m cable

Power supply

3 AAA 1.5 V batteries (approx. 200 h in continuous use)

Automatic disconnection

After 5 min. of measurement pause (can be disabled)

Condiciones ambientales

0...50 °C / 100 % H.r.

Dimensions

185 x 72 x 36 mm

Peso

300 g

Contents of the shipment

1 x Conductivity meter HI 9835

1 x HI 76309 conductivity probe

4 x Batteries.

1 x Hard case 

1 x Instruction Manual