Insulation Tester PCE-IT414

Insulation tester for high voltage up to 10,000 V /

6-digit LCD display / comprehensive protective head / CMOS microprocessor / measurement according to VDE 0413 part 1

The PCE-IT 414 insulation tester comes from a series of high-precision resistance equipment, robust with a 6-digit display. This insulation tester is specially designed for outdoor use and in adverse conditions. You can purchase the insulation tester here, in our online store. One of its advantages is the comprehensive protection circuit to prevent measurement errors caused by leakage currents. The insulation tester is equipped with a CMOS microprocessor and has optical and acoustic alarm signals. The unlimited calibration accuracy of the insulation tester is guaranteed as it has been factory calibrated for high-precision digital measurements.

- 6-position LCD display

- Measurement according to VDE 0413 part 1

- Control voltage up to 10,000 V

- Easy selection of test voltage

- EMC: EN 50081-1, EN 50082-1

- Seguridad IEC-1010-1; CAT III

Technical specifications

Model

PCE-IT414

DC control voltage

1.000 / 2.500/

5.000 / 10.000 V

Measurement ranges

60 GΩ / 1.000 V

150 GΩ / 2.500 V

300 GΩ / 5.000 V

600 GΩ / 10.000 V

Accuracy

±5 % + 2 dgt.

Output power

 maximum 1 watt

Insulation resistance between

the electrical conduction and the housing

2000 MΩ / 2000V

Static voltage between circuit and housing

700 V AC for a maximum of 1 minute

AC pre-alarm circuit

for voltages of > 450 V AC

Power supply

8 batteries of 1.5 V

Dimensions

250 x 110 x 190 mm

Peso

1,5 kg

Contents of the shipment

1 x Insulation meter PCE-IT414

1 x Silicone test lead with color coding

1 x Comprehensive protection head for high voltage with silicone coaxial conductors

8 x AAA batteries

1 x User manual

Measurement indications through an insulation tester:

- Disconnect the voltage

- Remove the bridge between N and PE

- Disconnect the fuses, LS switches

  and FI and the consumer.

- Connect the measurement lines between the

  phase conductor and PE and then between the

  phase and N conductor, connect the device to

  insulation test and perform the measurement.

  We find it reasonable to take a measurement

  between the phase conductors to detect with

  more ease of damage or aging of the

  lines. The minimum resistance values

  isolation must be in a measurement of

  voltage of 250 V DC 0.25 MΩ, at 500 V

  DC 0.5 MΩ and at 1000 V DC 1 MΩ.