LIE / O2 / CO / H2S Gas Detector GasPro

!! Do not forget to select the desired setting in the dropdown menu !!!

For other configurations contact us here

Gas detector Gas-Pro

mobile gas detector that detects up to 5 gases with optional internal pump /

one-handed use and Top Mount display, easy handling

The Gas-Pro gas detector can be equipped with up to 5 sensors, including CO2 with ATEX protection. The ability to equip the Gas-Pro gas detector with different sensors allows it to be used in pipelines, scrubbers, drains, landfills, ships, chemical and oil industries. Engineers have particularly considered in the development of this gas detector that the dimensions are small, the use is very simple with a single button, and that it has a good screen reading. With the 'top Mount' screen, this goal has been achieved, even in circumstances such as carrying the gas detector attached to the body. The single-button operation with a click or double-click is pleasant and allows navigation through the menu even if the user is wearing gloves. Another point to highlight is the 'Positive Safety' indicator. Through three LEDs positioned just below the screen, the status of the Gas-Pro gas detector can be detected. The green indication means everything is fine, the yellow indication requires a check of the gas detector, for example, inspection or calibration. The red indication means the Gas-Pro gas detector should not be used and must be sent back to the factory for inspection or repair. This allows even untrained personnel to know whether the Gas-Pro gas detector can be used or not. The pre-alarm and main alarm are activated acoustically (95 dB), optically with two visible color LEDs from any angle, and also by vibrating the device. A vacuum pump can be integrated into the shockproof rubber housing. The vacuum pump is activated through a contact when placed on the gas detector. The Gas-Pro gas detector can operate for up to 19 hours with charged batteries, and up to 17 hours with the use of the vacuum pump. The measured gas concentrations are stored every 10 seconds in the internal memory of the gas detector. In addition to recording measurement values, the last 1000 events are also recorded in memory (turning on, turning off, pre-alarm, main alarm, calibration, etc.). The recorded values can be transferred from the gas detector to a PC via a USB cable, a charging station with interface, or a calibration station.

- Acoustic alarm (95 dB)

- Visual alarm (two LEDs: red and blue)

- Gas meter with vibration alarm

- Very easy handling with a single button

- Screen on top

- "Positive Safety" indication green, yellow

  and red 

- Operation by diffusion or with pump

- Shock-resistant rubber housing

- LCD with backlighting

- Allows use in Ex environments 

- Regular control sound to indicate a

   funcionamiento correcto 

- Monitors up to 5 gases simultaneously

- IP 65/67 protection against water and dust

- Gas meter with data logging

- Automatic calibration with station 

  opcional I-Test Station

Technical specifications of the gas detector

Measurement ranges and alarm settings

Parameter / Gas

Symbol

Rango

Alarma

Resolution

PID

PID

0 ... 1000 ppm

50 ppm

1 ppm

Gases inflamables*

LIE (catalytic)

0...100 % LIE (LEL)

1 %

Carbon monoxide

CO

0...2000 ppm

30 ppm

1 ppm

Carbon monoxide

CO

0...500 ppm

30 ppm

1 ppm

Carbon monoxide

(filtered by hydrogen)

0...2000 ppm

30 ppm

1 ppm

Oxygen

O2

0...25 vol.%

19% / 23% vol

0,1 %

Carbon dioxide

CO2

0...5 vol.%

0...5 vol.%

0,01 %

Carbon monoxide

Hydrogen sulfide**

CO/H2S

(CO) 0...500 ppm

(H2 0...100 ppm

(CO) 5 ppm

(H2) 30 ppm

(CO) 1 ppm

(H2 0,1 ppm

Additional sensors for the gas detector

Amoniaco

NH3

0...100 ppm

25 ppm

1 ppm

Sulfur dioxide

SO2

0...20 ppm

1 ppm

0,1 ppm

Hydrogen sulfide

H2S

0...100 ppm

5 ppm

1 ppm

Ozono

O3

0...1 ppm

0,1 ppm

0,01 ppm

Cloro

Cl2

0...5 ppm

0,5 ppm

0,1 ppm

Chlorine dioxide

CIO2

0...1 ppm

0,1 ppm

0,1 ppm

Nitric oxide

NO

0...100 ppm

25 ppm

1 ppm

Nitrogen dioxide

NO2

0...20 ppm

1 ppm

0,5 ppm

Gases inflamables

LIE (infrarrojo)

0...100 % LIE (LEL)

20 %

1 %

* Can be calibrated to methane, butane, pentane, and ethylene. 

For calibrations to other gases, please consult us.

** Sensor combinado

Acoustic alarms

> 95 dB (A) a 30 cm

Acoustic control warning, the function can be turned off

Alarma visual

Very bright red and blue LED

visible from any angle

Vibration alarm

In addition to the acoustic and optical alarm, 

the gas detector also vibrates

Pantalla

LCD located on top

in case of alarm changes from green to red

Data logging

125 hours at intervals of 10 s 

(45.000 registros)

Power supply

Lithium battery (Li-Ion)

> 14 h in use by diffusion (13 hours in use with pump) based on CH₄, O₂, H₂S, CO

Approx. charging time 7.5 h

Muestreo

Bomba interna opcional

Gas detector protection

IP 65 / 67

Dimensions

130 x 84 x 43 (alto x ancho x profundo)

Peso

309 g four gases / 340 g with pump

333 g five gases / 362 g with pump

Condiciones ambientales

Funcionamiento

Almacenamiento

-20 ... +50 °C

-25 ... +65 ºC

20 ... 90 % H.r. non-condensing

Conformidad

FCC and CE 

Complies with EMC Directive 2004/108/EC

EN50270 and ICES-003

Autorizaciones

IECEx: Ex d ia IIC T4 Gb Tamb -20 a +55 °C

ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20 a +55 °C 

UL: Gas detector for hazardous areas class 1, division 1, groups A, B, C, and D only regarding intrinsic safety INMETRO

Interfaz

Specific USB cable 

Not included in the shipment!

¡Aviso!

According to ATEX and BG regulations (T021 and T023), any mobile gas detector must be visually inspected before any use or once daily, and the indication must also be checked. Our technicians and engineers will gladly advise you on test gases and the necessary equipment to perform such checks at 940788823.

Contents of the gas detector shipment

1 x Gas detector GasPro

1 x Cargador

1 x closure with clasp

1 x User manual

1 x Calibration certificate

1 x Suction port and tube (only in pump version)