Logic Analyzer USB-100

$ 460.00

Order Ref. No..: PCE-LOGIC-100

View list de Analizador Lógico PCE View list of Analyzer in other brands

View products PCE Buy

Logic analyzer 100 MSamples/s, 18 input channels, 100 Hz ... 100 MHz internal and external trigger, extensive Windows software
With the USB-LOGI 100 logic analyzer, it is possible to analyze up to 18 channels. The USB-LOGI 100 logic analyzer operates with a sampling rate of up to 100 MHz. Power is supplied via a USB port with 5 V. No external network component is required for the USB-LOGI 100 logic analyzer. The USB-LOGI 100 logic analyzer can process signals in the range of 0 to 5 V. The USB logic analyzer defines the high level from a voltage of 2 V. The low level is detected below 0.8 V. In addition to an internal trigger, the USB-LOGI 100 logic analyzer can process an external trigger signal. Here, the logic analyzer distinguishes between levels, edges, and Channel Skew. The USB-LOGI 100 logic analyzer is connected via an additional measurement cable to the measuring equipment. The USB logic analyzer can be connected directly to the designated pins of processors or logic components through optional micro-plebs. Complete logical analysis is performed with the included Logi+ software. The software is compatible with Windows 2003 and above.
- 18 canales - Trigger externo / interno - 100 MSamples / segundo	- Identification of low and high levels - Extensive Windows software - Additional measuring cables
Technical specifications
Interfaz		USB
Power supply voltage		5 V via USB interface (does not require network component)
Number of channels		18
Input level		0 ... 5 V
Valor umbral		Bajo: < 0,8 V Alto: > 2 V
Sample buffer		4096 K x 36 bit
Time mode (internal clock)		100 sample/s ... 100 Msamples/s
Sampling rate (external clock)		0 ... 100 MHz
Measurement share		100 Hz ... 100 MHz
Pre-trigger		1/8 ... 7/8 trigger preestablecido
Trigger levels		2
Channel trigger adjustment		Level, edges, channel tilt
Conector		1 x 20-pin connector.
Temperatura operativa		10 ... 50 °C
Dimensions		80 x 61 x 22 mm
System requirements		USB 2.0 or USB 1.1 interface screen resolution 1024 x 786 Windows 7 / Vista / XP / 2003
Contents of the shipment 1 x USB Logic Analyzer USB-LOGI-100 1 x Software for Windows "Logi+"