![]() |
PRECIO : Dolares Americanos
|
|
![]()
MEMMERT ONE 29 WATER BATH, 29 LITERS
Fuzzy base controller microprocessor PID with integrated self-diagnostic system with fault indication
solid-state switching unit
2 class A Pt100 sensors in 4-wire circuit, tracking and taking over the performance at the same temperature value mutually
digital timer of 1 minute. up to 999 hours:
ON (continuous operation),
RETRASADO EN,
Holders or dependent with time the guaranteed stable temperature celebration
digital display (LED) of all set parameters, such as temperature and alarm values (0.1 °C resolution), as well as time values
Calibration installation in the controller
Acoustic and visual alarm at the end of the program and as input recognition, as well as in case of low liquid level, heating disconnects automatically
Triple Overtemperature Protection
in case of overheating due to a fault, the heating disconnects at approx. 10 °C above the set temperature (fixed value)
to operate independently, whether electronic temperature limiter for excess temperature TWB protection class 2
screen resolution and precision setting: 0.1 °C below 99.9 °C, 1 °C above 100 °C
Mechanical temperature limiter of protection class 1 TB to change heating at approximately 30 °C above max. bath temperature
Stainless steel covered texture
l x w x h: 818 x 516 x 238 mm
material 1.4301 (ASTM 304), corrosion-resistant
Interior - Heating concept
l x w x h: 590 x 350 x 140 mm, 29 l
Easy to clean interior, made of stainless steel, reinforced with embossed ribs, material no. 1.4301 (ASTM 304), laser welded
corrosion-resistant large heating surface on three sides
Temperature range
min. 5 °C above ambient up to + 200 °C
Voltaje / Power nominal
230 V (+/- 10%), 50/60 Hz
aprox. 2.400 W (durante el calentamiento)
packaging data
peso neto aprox. 22 kg
cardboard gross weight approx. 29 kg
Dimensions aprox .:
carton w x H x D: 91 x 61 x 40 cm
The devices must be transported in an upright position.
Customs number
8419 8998
Country of origin
Federal Republic of Germany
WEEE-Reg.-No.
DE 66812464
accesorios
Flat stainless steel cover with openings and sets of concentric rings (8 openings / 107 mm diameter) L0
Flat stainless steel cover with openings and sets of concentric rings (4 openings / 147 mm diameter) L2
Stainless steel cover Gable mounted for Condensate L1
Calibration certificate operation (37 °C during WNE, WPE, 160 °C during a) Z4
INCLUYE
CONTACTENOS: 24 hours for sales, maintenance, calibration, certification...
"Equinlab SAC contributes to the development and innovation of new technologies in Peru"
|








contact with the import area through 




