PCE-CM 4 Amperemeter

Amperemeter PCE-CM 4

Ammeter up to 400A / HOLD and MIN/MAX function / non-contact measurement /

without circuit interruption

This PCE-CM 4 ammeter allows measurements of AC currents in inaccessible electrical cables. For this purpose, the ammeter consists of a flexible current probe. Thanks to this flexible current probe, the ammeter can measure in narrow or hard-to-reach places. The measurement results can be read on the 4-digit LCD screen of the ammeter. With the Hold button, you can freeze the measurement values on the screen. The operation of the device is very simple. The ammeter has a rotary switch and through a button, you can activate the Hold function or the maximum/minimum value. The battery life is up to 120 hours in operation. The ammeter has an auto shut-off function; when not in use, the device turns off after 15 minutes to conserve battery.

- Measurement range: 4 A / 40 A / 400 A AC

- Resolution: 0,001 A / 0,01 A / 0,1 A AC

- Accuracy: ± 3 %

- Easy to use

- HOLD and MAX/MIN function

- 4-digit LCD display

- Backlighting

- Auto shut-off function

Electrical specifications

Measurement range

4A / 40A / 400A

Resolution

0,001A / 0,01A / 0,1A

Precision (45 ... 500 Hz)

±3 %

Power supply

2 x AAA or 2 x UM-4; 1.5 V

Battery charging time

120 horas

Temperature coefficient

0.1 variation over 28 or below 18 °C

Pantalla

4-digit LCD display

Sobrecarga

If the signal exceeds the maximum value, -OL- appears on the screen

Sampling frequency

2 mal/s

Battery status indication

The battery status is displayed when low

Auto-off function

When not in use, the device turns off after 15 minutes

Sensor cable length

203 mm

Sensor cable diameter

5,5 mm

Cable length

1,5 m

Peso

196 g (with batteries)

Contents of the shipment

1 x Flexible ammeter PCE-CM 4 

2 x Batteries 

1 x Instruction Manual