PCE-UT 803 Multimeter

More images:

Economical true RMS bench multimeter with different functions 

measurement port, RS-232 and USB, software and powered by battery and mains

This bench multimeter can be used both mobile and stationary in the workshop. The bench multimeter can be powered by battery or mains electricity. Thanks to its wide measurement ranges, this equipment can be used in virtually any application. In addition to accurately detecting DCV, ACV, DCA, ACA, and resistance, this bench multimeter also detects capacitance, frequency, and temperature. It also incorporates an acoustic continuity test, a transistor test, and a diode test. Additionally, it can memorize measurement values and transfer them via the software, which we include in the shipment (includes USB and RS-232 data cable) to your computer or laptop. Thanks to the data logging function of the software, you can perform long-term recordings on components or electrical groups, machines, and installations. We always send this bench multimeter factory calibrated; however, you can additionally request an ISO calibration certificate (with the first order or for your annual recalibration).

- Good basic accuracy - DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, transistor test.

- Continuity test, diode test

- Measurement of real effective value

- Min/max/HOLD functions.

- Automatic disconnection (can be disabled)

- Additionally, an ISO calibration certificate can be issued

- Battery status indication.

- Large LCD display with backlight

- USB and RS-232 port

- The shipment includes software and data cable

- Power supply by battery and mains electricity

- Frequency measurement up to 60 MHz

- Protection according to IEC 1010; CAT I 1000 V/ II 600 V

Technical specifications

Measurement ranges

DCV:    600 mV/ 6/ 60/ 600/ 1000 V

ACV:    600 mV/ 6/ 60/ 600/ 750 V

DCA:    600/ 6000 µA; 60/ 600 mA; 10 A

ACA:    600/ 6000 µA; 60/ 600 mA; 10 A

OHM:   600 Ω; 6/ 60/ 600 kΩ; 6/60 MΩ

Cap.:    6/ 60/ 600 nF; 6/ 60/ 600 µF; 6 mF

Frec.:   6/ 60/ 600 kHz; 6/ 60 MHz

Temp.:  -40 °C ... +1000 °C

Resolution

DCV:    0,1 mV; 0,001/ 0,01/ 0,1/ 1 V

ACV:    0,1 mV; 0,001/ 0,01/ 0,1/ 1 V

DCA:    0,1/ 1 µA; 0,01/ 0,1 mA; 0,01 A

ACA:    0,1/ 1 µA; 0,01/ 0,1 mA; 0,01 A

OHM:   0,1/ 1/ 10/ 100 Ω; 1/ 10 k Ω

Cap.:    1/ 10/ 100 pF;  1/ 10/ 100 nF; 1 µF

Frec.:    1/ 10/ 100 Hz; 1/ 10 kHz

Temp.:  1 °C

Accuracy

DCV: ± 0.3 % of the indication + 2 dgt (up to 600 V);

            ± 0,5% + 3 dgt (por encima)

ACV: ± 0.6 % of the indic. + 5 digits (up to 600 V);

            ± 1,2 % + 3 dgt (por encima)

DCA: ± 0.5 % of the indication + 3 digits (up to 60 mA);

            ± 0,8 % + 3 dgt (hata 600 mA)

            ± 1,2 % + 3 dgt (por encima)

ACA: ± 1.0 % of the indication + 5 digits (up to 600 mA)

            ± 2 % + 6 dgt (por encima)

OHM: ± 0.5 % of the indication + 2 digits (up to 600 kΩ);

            ± 0,8 % + 2 dgt (a 6 MΩ)

            ±1,2 % + 3 dgt (por encima)

Cap.: ± 2 % of the indicated + 5 digits (up to 60µF)

                ±3 % of the indication + 4 digits (up to 60µF) 

            ±5 % of the indic. + 4 digits (at 6 mF)

Freq.: ± 0.1 % of the indicated + 3 digits

Temp.: ± 1.0 % of indication + 3 digits

Measurement share

2-3 / s

Acoustic signal for continuity test

Below 30 Ω

Diode test

Up to 2.7 V/1 mA

Puerto

USB and RS-232

Software and data cable

Both are included in the shipment, suitable for all Windows systems

Max. screen resolution

LCD display with backlight up to 5999

Power supply

230 VAC and/or 6 x 1.5 V batteries

Automatic disconnection

After 10 minutes of inactivity (can be deactivated)

Dimensions

240 x 105 x 310 mm

Peso

2000 g

Condiciones ambientales

Max. 70% H.r. / 0 ... +50 ºC

Type of protection / Regulation

IEC 1010-1, CAT I 1000 V/ II 600 V

Contents of the shipment

1 x PCE-UT 803 bench multimeter

1 x Test lead set 

1 x Temperature sensor (type K)

1 x Adapter x Network adapter

1 x Cable USB 

1 x Cable RS-232

1 x Software

1 x User manual