Roughness Meter HOMMEL ETAMIC W5

hand-held roughness meter for quick measurements / high precision / extensive range of probes / USB and Bluetooth interface / extendable supports to modify height / Li-Ion accumulator

Introducing the handheld roughness meter from the Hommel-Etamic series by Jeoptic. The handheld roughness meter is especially suitable for quick on-site measurements on machines or metrological enclosures. Thanks to its extensive range of probes, which can be easily changed, the handheld roughness meter can be used on different types of surfaces. Contact with the parts is made with four precision polished axes. This ensures a permanent and stable support on the parts. If you want to measure the surface of a part that is higher, you can adjust the height of the handheld roughness meter using the two extendable supports. The positioning light facilitates better visibility in the measurement area. The handheld roughness meter has 5 measurement programs and stores the measured data in its memory. You can transfer this data to your PC via the included USB cable, as it is compatible with Windows data format. When you connect the handheld roughness meter to your PC, the battery charging is also activated. You can also use the included power adapter to charge the battery; in this case, a full charge takes only 4 hours.

- Minimal weight, allows for manageable use 

- Power constante 

- Acumulador Li-Ion 

- USB and Bluetooth interface 

- Luz integrada 

- Mobile use

- Easy-to-read color display

- Valores fiables

- Complies with the most important standards

- 25 roughness units

- Manejo sencillo

- Wide range of accessories

Technical specifications

Total deviation according to N 4772 

Class 1

Measurement range / resolution

320 μ (-210/+110) / 5 nm

Palpador

Inductive with slider, 2 μm/ 90 °

Measurement unit

Selectable between μm/μinch

Length of probing

Maximum 17.5 mm

According to ISO/JIS / 1.5 / 4.8 / 15 mm

According to MOTIF / 0.64 / 3.2 / 16 / mm

Cut Off (ISO / JIS)

0,25 / 0,8 / 2,5/ mm

Sampling length Ir/p>

1...5 seleccionable

Filtro

Filtro profesional Gauss

Filter according to DIN EN ISO 11562 standard

Filter according to ISO 13565-1 standard

Filter λs according to DIN EN ISO 3274 standard

Robust Gauss filter according to ISO 16610-31

Palpation speed

0,15 /0,5 /1/ mm/s | Retorno: 3 mm/s

Interval between each measurement point 

Min. 0.5 μm (9600 points for lt = 4.8mm)

Parameters

DIN EN ISO 4287:

Ra, Rz, Rmax(Rt), Rq, RSm, Rmr(c) , RSK

DIN EN ISO 13565:

Rk, Rpk, Rvk, Mr1, Mr2, A1, A2

MOTIF ISO 12085:

R, AR, Rx

ASME B46

Rp, Rpm

JIS B601

Rz-JIS, Ry (corresponde a Rz), 

tp (corresponde a Rmr)

DIN EN 10049 

RPc

Daimler DB N 31007 

R3z

HOMMEL-ETAMIC

V0 (oil retention)

Memory capacity

5 measurement programs

Registro Offline

Max. 100 profiles, max. 10,000 measurements

Working temperature

+5 ... +40 °C

Dimensions

50 x 63 x 127,5 mm

Peso

270 g

Interfaz

USB, Bluetooth

Power supply

Acumulador Li-Ion

Accumulator capacity

800 measurement cycles

Charging time of the battery

4 h

Power range

100  ... 264 V

Contents of the shipment

1 x Handheld roughness tester Hommel-Etamic W5

1 x Palpador T1E, 2μ/90°

1 x Power adapter

1 x Cable USB

1 x Support prism for small diameters

1 x Probe protection

1 x Factory certificate

1 x Instruction Manual 

1 x Transport case