ScopeMeter FLUKE 125/S

Robust, user-friendly power analyzer with multimeter, oscilloscope, and data logger function

The Fluke ScopeMeter 125/S power analyzer is a robust device for fault location in industrial environments. This power analyzer integrates an oscilloscope, a multimeter, and a paperless 'recorder' into a single, affordable, and easy-to-use device. The power analyzer is the right equipment to troubleshoot machines, instrumentation, and control and electrical power systems. In today's complex systems, a numerical measurement does not provide enough information to determine the cause of a failure. Anomalies in signals, voltage drops, and unexpected failures that can cause machine downtime are better seen with an oscilloscope. The Fluke ScopeMeter 125/S meets the current needs to measure and check waveforms simultaneously. The unique Connect-and-View™ triggering mode automatically displays stable waveforms for virtually any imaginable signal. It provides stable, reliable, and repeatable visualization of almost any signal, including control signals and variable speed drives, without the need to press a button.

- Oscilloscope bandwidth 40MHz

- TRMS digital multimeter with two channels and 5,000 digits

- Automatic measurements

- Two channels with TrendPlot™

- Automatic Connect-and-View™ trigger types for easy measurement

- Shielded test cables for oscilloscope modes, resistance measurements, and continuity

- 10:1 - voltage probe for high frequency measurements

- Battery life up to 7 hours

- Seguridad EN61010-1 CAT III 600 V

- Optically isolated interface for PC connection

- Compact and robust equipment

- Measurement of VDC, VAC, VAC+VDC, Ohms, Continuity, Diode check, Current, °C, °F, Capacitance, dBV, dBM, Crest factor, Touch Hold and Zero adjustment

- Includes bus status test function and power measurement

- FlukeView Software for post-analysis of measured values

Technical specifications

Model

ScopeMeter FLUKE 125/S

Bandwidth of the oscilloscope

40 MHz

True RMS multimeter with two channels

VDC, VAC, VAC+VDC, Ohms, Continuity, Diode check, Current, °C, °F, Capacitance, dBV, dBM, Crest factor, Touch Hold, and zero adjustment.

Registro TrendPlot

Automatic vertical scale and temporary compression. 

Presentation of actual readings of minimums, maximums, and average.

Cursores

∆T, 1/∆T, V, ∆V, rise and fall time

Max. real-time sampling rate

25 MS/s

Equivalent sampling speed

up to 2.5 GS/s (125, 124) or 1.25 GS/s (123)

Channels and digitizers

2

Time base range

20 ns -1 min/div

Input sensitivity

5 mV -500 V/div

Types of trigger

Connect-and-View™, Free, Single shot, Edge, Video, External

Peak capture

40 ns

Oscilloscope measurements

26 automatic measurements, W, VA, VAR, and PF for balanced single-phase and three-phase electrical systems (in triangle)

Harmonic frequency range.

CC up to the 33rd harmonic (fundamental up to 60 Hz);

CC up to the 24th harmonic (fundamental up to 400 Hz).

Maximum recording length

512 min./max. input points

Memoria

20 displays and settings

Working temperature

0 ... 50 ºC

Storage temperature

-20 ... +60 ºC

Altitud

3.000 m

Seguridad

Seguridad EN61010-1 CAT III 600 V

Dimensions

232 x 115 x 50 mm

Peso

1,2 kg

Warranty

3 years on parts and labor (one year on accessories).

Power supply

NiMH Battery

Interfaz

Optically isolated RS-232 interface

Contents of the shipment

1 x FLUKE 125/S Power Analyzer ScopeMeter

1 x SCC 120 (C120 hard case, OC4USB interface cable, SW90W FlukeView software (ScopeMeter))

1 x Rechargeable battery BP120MH

1 x Power adapter / charger PM8907 

1 x STL120 Shielded test lead set

1 x HC120 Pinzas tipo gancho

1 x BB120 Adaptador BNC apantallado

1 x AC120 Alligator clips

1 x PM8907 Battery charger/power adapter

1 x BP120MH – NiMH Battery Pack (installed)

1 x Quick start guide

1 x User manual (CD-ROM), multilingual