Thermometer GIR 2002

GIR 2002

Universal input meter and regulator 48 x 96 mm

Thanks to its compact design and ease of use, the universal regulator GIR 2002 is ideal for building simple control systems (on/off system, relay output).

Thanks to the universal input and the different functions of the switch, the regulator can be optimally adapted to the installation's needs. The structured menu allows for easy handling and quick parameterization of the regulator.

The LED operational status indicator informs the user about the current state of the switching output. A comprehensive diagnostic and self-check system enhances operational safety and communicates system failures through relevant error codes. Thanks to the automatic parameter logging, all data is retained even after a power failure. 

In the transducer feeder (24VDC/22mA), almost all GREISINGER transducers, tachometric transmitters, and flow sensors can be connected directly to the regulator, among others. In the selection of thermoelements or resistance thermometers, the indication can be selected in °C or °F. Additionally, an offset value can be entered for measurement value correction (e.g., line resistance compensation). Current and voltage inputs can be scaled as desired in the range from 1999 to +9999.

The GIR 2002 comes standard with a serial interface, with bus support system, where comfortable parameter programming as well as measurement value recording can be performed. Through the Windows function library EASYBUS.dll, optionally available, up to 240 devices can be included in some programs (e.g., LabView).

Applications:

- Process regulation

- Temperature regulators

- Pressure control

- Indication of revolutions

- Flow meter

- etc.

Technical Sheet

Measurement input

Normalized signals, resistance thermometer (Pt100, pt1000)

Termoelemento (J, K, N, S, T), frecuencia, caudal, revoluciones,

Up/down counter, serial port

Indication range

-1999 ... 9999 digits, freely scalable 

(in case of normalized signal)

Salidas conmutadas

1 x Conmutador (250VAC/10A), 

free of potential

1 x Working contact (250VAC/5A), 

free of potential

Switching function

Display, 2-point regulator, 3-point regulator, 3-point modulating regulator,

2-point controller with alarm, min/max alarm.

Response time

Less than 25 ms (in case of normalized signal)

Less than 0.5 s (in case of temperature and frequency)

Pantalla

Red LED with 4 digits, approx. 13 mm height,

Power supply of the transducer

24 ... 20 mA, separated by galvanization

Power supply

230 VAC, 50/60 Hz

Power absorbida

Aprox. 6 VA

Operating conditions

-20 ... +50 °C, 0 ... 80 % H.r.

Dimensions

48 x 96 x 115 mm (alto x ancho x profundo)

Electroconnection

Through plug/thread terminal

Cross-section of the conductor of 

0.14 to 1.5 mm²

Type of protection

Parte frontal IP54

Interfaz

Serial port, galvanic isolation, compatible with EASYBUS

Others

Max/min value memory, self-checking system and diagnostics, etc.