Universal Torque Meter PCE-MMT E

Universal torque meter for systems and mechanical engineering / 1 ... 5000 Nm / 

IP 64 protection / frequency 50 ... 200 Hz / different sensors with TEDS memory

internal flash and memory card / optional SoftPCE software

The universal torque wrench PCE-MMT E is especially used in the development of gears and combustion engines, as torque and revolutions are essential measurements. Therefore, the universal torque wrench is suitable for systems and mechanical engineering and for propulsion, extraction, and testing techniques. The universal torque wrench PCE-MMT E measures torque using an external sensor that must be ordered separately. These torque sensors are sensors that determine the torque by the deformation of the body to be measured. The universal torque wrench PCE-MMT E measures between 1 and 5000 Nm. The sensors of this torque wrench are protected according to IP64 and have an integrated TEDS* module. You can adjust the measurement frequency between 50 and 2000 Hz. The internal memory allows recording values in *.csv format compatible with Excel. The internal flash memory is 128 kB. Additionally, a 2 GB memory card is included in the shipment. With the optional SoftPCE software, you can transfer and save data on your PC. You can mount the universal torque wrench using two M6 mounting holes, both front and back. A particular feature of the universal torque wrench is that you can use it as a dynamometer thanks to other optional sensors.

- 2.8" LCD display with backlight

- 1 ... 5000 Nm (depending on sensor)

- Internal flash memory and 2 GB SD card

- 2 salidas digitales Open-Collector

- TEDS module connection

- Software SoftPCE opcional

Technical specifications

Measurement insecurity

≤ ± 0.05% of the nominal characteristic value

Frequency in measurement

50 ... 2000 Hz, ajustable

Procesador

32 bit RISC μProzessor, 128kB FlashA

Pantalla

7 digits + comma

2.8" LCD with backlight

(128 x 64 Pixel)

Transductor A/D

24 bit

Analog output of the external signal

0 ... 2 V DC

Screen resolution

± 50,000 digits

Signals for limit values

2 salidas digitales Open-Collector, programable

Power supply

4 acumuladores AA Ni-MH + cargador USB

Possibility to use standard batteries

Data logging

Memora 128 kB Flash

2 GB interchangeable SD card

Data logging frequency

up to 2,000 Hz with real-time recording

Data export (USB)

Device connection with customer streaming for continuous real-time transmission to the PC (... 100 Hz)

Ability to export in *.csv format

Real-time data indication

Mediante Software SoftPCE opcional

(Win XP/Vista, Win 7 und 8)

Dimensions

170 x 75 x 35 mm

Peso

aprox. 620 g

Tiempo operativo

aprox. 10 h (con acumulador)

Carcasa

Die-cast aluminum housing according to RAL7035



With ergonomic handle and 2 M6 mounting holes, both at the front and rear, for mounting on a test stand.

Contents of the shipment

1 x Torquimetro universal PCE-MMT E

1 x 2 GB SD memory card

1 x Factory calibration certificate

1 x Cargador

1 x User manual