VERTICAL AUTOCLAVE AE 150 DRY, 175 LITERS

Temperature adjustable from 105 °C to 139 °C.

Presion maxima: 2,5 bar.

SEGURIDAD

Independent device that prevents opening the autoclave lid while there is pressure in the sterilization chamber.

Over-temperature safety thermostat.

Safety pressure switch. Disconnects heating in case of excessive pressure.

Safety valve. Releases pressure in case it exceeds the maximum limit.

FEATURES

Steam sterilization autoclave, with a single chamber.

Exterior cabinet and countertop in AISI-304 stainless steel.

Deposit closure lid, made of stainless steel AISI-316.

Water reservoir for feeding the autoclave, with maximum and minimum level detector.

Automatic water filling in the sterilization chamber.

Air purge and final drying with vacuum system.

1/2” threaded hole with cap for probe insertion for validation (accessible from the back).

RS-232 output to connect a printer or to a PC.

Silicone gasket on the cover.

PT100 temperature sensor - class A

Temperature control with microprocessor with P.I.D. action.

Electric heating with armored resistance in the chamber itself.

Supplied with a protective perforated rack for the heating element and without baskets.

MICROPROCESSOR FEATURES AND FUNCTIONS 

The STERILMATIC-C autoclaves are equipped with a microprocessor, which is the result of research and long experience as manufacturers of autoclaves, to meet the needs and demands of the sterilization user.

The microprocessor equipped with an alphanumeric liquid crystal display indicates which phase of the process is being performed or what anomaly has occurred, prints the sterilization data, as well as the date and time to validate the sterilized product.

Supports a second temperature probe to detect the actual temperature in the 'heart' of liquids or in waste bags, thus effectively and correctly sterilizing them. In short, it has been designed to maximize the sterilization process.

Parametros programables:

Sterilization temperature.

Sterilization time.

Drying or not drying.

Drying time.

Sterilization mode: SOLIDS / LIQUIDS.

Printing of parameters.

Programming variables:

Number of programs: 10

Sterilization temperature: from 105 to 139 ºC.

Sterilization time: from 3 to 120 minutes.

Solidos / Liquidos.

Drying / No drying.

Drying time: from 1 to 60 minutes.

When we run a program, the microprocessor screen, besides displaying the temperature and sterilization and drying time, indicates the phase of the sterilization cycle.

A complete sterilization cycle consists of the following phases:

VACIO: Initial vacuum (air expulsion from the chamber).

LLENADO: Automatic filling of distilled water from the sterilization chamber.

CALENTANDO: Heating and pressure increase.

ESTERILIZANDO: Esterilizacion.

DESCARGANDO: Automatic discharge of water and steam from the sterilization chamber to the distilled water tank.

SECADO: Vacuum drying and barometric leveling.

END OF PROCESS: Notification of the end of the sterilization cycle.

The microprocessor screen will give warning messages when, for example, the condensate tank does not have enough water, when the bacteriological filter needs to be changed, or when it is printing results.

Likewise, if there is any anomaly during the execution of a program, apart from the program being aborted, it will give us a fault message, for example, due to a broken temperature sensor, if there is a fault during the filling period of the autoclave chamber, if there is a fault during the heating period, if the sterilization temperature differs by 2 degrees, either more or less, from the selected temperature, if there has been a power cut, etc... All these messages on screen greatly assist the user in interpreting a possible anomaly.

In liquid programs, the 'discharging' phase does not run, and instead, there is the 'cooling' phase (natural heat loss cooling until the end process temperature). Likewise, in liquid programs, the 'drying' phase does not exist as it is not possible to program a final drying.

DESCRIPCION TECNICA

End of process

Secando

Descargando

Esterilizando

Vacio

Calentando

- Capacity: 150 liters.

- Internal dimensions (Diameter x Height in mm): 500 x 750.

- External dimensions (Height x Width x Depth in mm): 1,310 x 760 x 850.

- Consumo: 6000 W.