Video Endoscope VIS 350

battery-powered video endoscope with 7" color monitor, 360º rotating head and 180º swivel / VIS 350 with video memory on SD card

The rotating head of the VIS 350 video endoscope ensures a complete view in hard-to-reach places. It makes dark areas visible. The small mobile color camera of the VIS 350 video endoscope allows for more possibilities in image analysis in narrow pipes, wells, and cracks. The lens provides a very sharp image for detecting cracks, defective welds, or joints. The head of both models, with a diameter of 40 mm, is so small that it fits into almost any space. Additionally, it rotates around its axis 360º and turns left to right 180º. This mobility allows for a new way to inspect defective water pipes, air ducts, false ceilings, or chimneys. Furthermore: The video endoscopes are bright, waterproof, and easy to handle. A single press and the equipment is ready. The images are sent to a color screen with excellent clarity. This allows you to detect and assess weak points. It also integrates a video output for image documentation. The power supply for the video system is provided by batteries; it is also possible to power it via a network component. A piece of equipment that should be part of your setup: The hard case integrates the camera, screen, and additional components. A special feature of this video endoscope is its Start function. If the corresponding key is pressed, the camera head automatically returns to its initial position. Additionally, the VIS 350 video endoscope can be economically located by radio; for this, you also need the L 200 locator, which further facilitates the exact location of fault points in pipes. The L 200 locator can be easily attached to a telescopic rod and then guided along the floor, on a wall, or under the ceiling. The locator of the video endoscope measures the long radio waves from the camera head, while the user is guided throughout the process by the clear color screen and acoustic signal to the section of pipe that needs to be repaired. Once the affected section of pipe has been found, you can mark it using one of the chalk holders located at the end of the locator.

- Rotating and swiveling head with a diameter of 40 mm

- Lighting 12 white LEDs

- Electronic counter

- Start function

- The optics rotate 360º on its axis and rotate 180º of

  left to right, allowing for a wide view

- Optional radio localization

- 7" color display

- Model VIS 350 with SD memory card

Technical specifications

Pantalla

Housing dimensions

18 x 11,5 x 3 cm

Pantalla TFT

7,2" (18 cm) formato 16:9

Salida / Video Out

FBAS signal (Chinch)

Peso

400g

Power supply

2 replacement batteries each 12 V or power cable

Tiempo operativo

max. 2 accumulators each 120 min. = 4 h

Rotary and swivel head with a diameter of 40 mm

Cabezal mini a color

1/3 " COLOR CMOS

Pixels

785 x 576 (PAL), 656 X 492 (NTSC)

Light sensitivity

0,5 lux

Objetivo

f = 2,3 mm , F = 2,5

Image perception angle

115 °

Light source

12 LED's blancos

Protection

Water resistant IP 67 (protection type)

Dimensions

Ø 40 x 60 mm

Temperatura operativa

0 ... +40 ºC, max. 95% H.r.

Storage temperature

-20 ... +50 ºC, max. 95% H.r.

Locator transmitter

Transmission frequency

8,9 Hz

Push tube

Longitud

20 m

Diameter

Ø 6,5 mm

Double-rigid case

Dimensions

51 x 43 x 17 cm

Peso

8,2 kg

Length measurement

Tipo

Electronic counter

Resolution

0,04 m

Locator receiver

Pantalla

Graphical display of transmitter location

Output impedance

Auriculares

Tip. 32 ohmios

Power supply

3.7 Lithium-Ion battery

Temperatura operativa

0 ... +40 ºC

Storage temperature

-10 ... +50 ºC

Peso

605 g

Dimensions

32 x 14 x 7 cm

Memory (for the VIS 350 video endoscope only)

Recording

2 GB SD card (2.5 h recording time)

Puerto

Mini USB connection

Contents of the VIS 350 video endoscope shipment in a double-rigid case

1 x endoscope video VIS 350 in double-rigid case,

1 x rotary and swivel head with a diameter of 40 mm with location sensor,

1 x TFT color monitor in widescreen format

1 x 2 GB SD card,

1 x conecto mini USB,

1 x 2 m connection cable,

1 x 20 m cable with Ø 6.5 mm, 

5 x spare plastic protective housings,

1 x alfombrilla antideslizante, 

2 x NiMH battery, 

1 x cargador