Universal Calibrator PCE-C 456

Calibrator / Nominal value indicator / process calibrator for simulation and measurement with graph / pulse generator (simple and cyclic ramps)

The portable universal calibrator PCE-C 456 is especially suitable for calibration and maintenance. This universal calibrator facilitates the measurement and simulation of electrical magnitudes, both on-site and in the laboratory. It has measurement functions, voltage and current simulation (DC voltage and current or low-frequency ramps) and continuity testing (in passive circuits). Due to its control structure (regulation) in simulation mode, it is not possible to perform a measurement and a simulation simultaneously. The calibrator is equipped with multiple additional functions: - Indication of results according to a linear and non-linear conversion law / - Pulse generation, simple or cyclic ramps. We are offering you a high-quality alternative to other equipment available on the market that is quite expensive.

- Real-time date and time

- Portable device powered by 4 AA batteries 

  (optionally via the 1.7 Ah accumulator)

- Battery status indication

- Tiempo operativo: 10 ... 40 h

- Graphic indication of 160 x 160 pixels

- Puerto USB

- Language selection for programming and messages (Spanish, German, French, and English)

- Backlighting (can be turned off)

- ABS housing with rubber protective cover

- Waterproof IP54 according to EN 60529 standard

- Complies with EN 61010/CEM-EN 61326 regulations

- Possibility to obtain an ENAC calibration certificate

Technical specifications

Measurement functions

Corriente DC mA

Rango

4 … 20 mA

0 … 20 mA

24 mA

Resolution

1 µA

1 µA

1 µA

Accuracy

±0.015 % +2 µA of the measurement value

±0.015% +2.6 µA of the measurement value

±0.015 % +2 µA of the measurement value

Temperature coefficient

<20 ppm / ºC from 0 ... +18 ºC and from +28 ... +50 ºC

Possible circuit power supply

24 V ±10 %

Input resistance (Rin)

<30

Compatibilidad HART

R = 250 Ω

Common mode suppression

120 dB at 50 and 60 Hz

V DC voltage

Rango

0 ... 10 V

25 V

50 V

Resolution

1 mV

1 mV

1 mV

Accuracy

±0.015 % + 2 mV of the measurement value

±0.015 % + 2 mV of the measurement value

±0.015 % + 4 mV of the measurement value

Temperature coefficient

<15 ppm / °C from 0 ... +18 °C and from +28 ... +50 °C.

Series rejection

>60 dB at 50 and 60 Hz

Common mode rejection

>120 dB at 50 and 60 Hz

Function generator

Corriente DC mA

Rango

4 … 20 mA

0 … 20 mA

24 mA

Resolution

1 µA

1 µA

1 µA

Accuracy

±0.015 % +2 µA of the measurement value

±0.015% +2.6 µA of the measurement value

±0.015 % +2 µA of the measurement value

Temperature coefficient

<20 ppm / ºC from 0 ... +18 ºC and from +28 ... +50 ºC

Rising flank

<500 µS (0 ... 20 mA with a 20 Ω load)

Low frequency noise

<1 µA (con F <100 Hz)

V DC voltage

Rango

0 ... 10 V

15 V

Resolution

1 mV

1 mV

Accuracy

±0.015 % + 2 mV of the measurement value

±0.015 % + 2 mV of the measurement value

(Iout max = 10 mA (a 10 V))

(Iout max = 8 mA (a 15 V))

Temperature coefficient

<15 ppm / °C from 0 ... +18 °C and from +28 ... +50 °C.

Rising flank

<1 mS (0 ... 15 V with a 1 MΩ load)

Resistencia interna

1 Ω

Low frequency noise

<1 mV (con F <100 Hz)

Continuity function

Rango

Continuidad

Resolution

abierto / cerrado

(considered closed if Z=[0 ... 1 kΩ] and open if Z=[1 kΩ ... ∞ ]

Propiedades generales

Pantalla

160 x 160 graphic LCD

Operating temperature range

0 ... +50 ºC

Operating humidity range

<85 % H.r.

Storage temperature

-10 ... +60 ºC

Storage humidity

<85 % H.r.

Power supply

4 x pilas AA or rechargeable battery 1.7 Ah

Tiempo operativo

Measurement U and I (>40 h)

mA / 24 V simulation (>10 h)

Standby mode >95 days

Battery status indication

Sí

Dimensions

157 x 85 x 45 mm

Peso

Aprox. 300 g

Contents of the shipment

1 x Calibrador universal PCE-C 456

1 x Mfin

4 x Pilas

1 x Chand strap

1 x Ctest cables with crocodile clips

1 x Instructions for use

OPTION: Battery + fast battery charger---150 US$