Water Leak Detector GEWAS 191 AN

GEWAS 191 AN

Water leak detector, with machine disconnection>

> Control device included, water sensor, magnetic valve, alarm bell, additional machine disconnection in case of alarm (up to 16A, 230V 50Hz).

Usos:

> Washing machines, dishwashers, medical consultations (e.g., dental consultations, cooling devices, etc.), hospitals, industry, research, laboratories, all equipment and machines that have a water connection (e.g., hot beverage machines, refrigerators, etc.)

Montaje:

> mounts in 2 minutes without additional parts or tools. Anyone can mount it!

Magnetic valve:

> Fiberglass reinforced with polyamide (like for a regular washing machine). Low voltage safety 12V DC. Connections: ¾" threaded connections to attach to the water tap, or standard connection hose for washing machine or dishwasher ½" with ¾" nut or coupling nut to the magnetic outlet valve. In case of power failure, the magnetic valve closes automatically. (Minimum pressure difference between the inlet and outlet: minimum inlet pressure 0.5 bar greater than outlet pressure)

Water sensor:

> Highly sensitive water sensor, with plug, 2m cable. The alarm is triggered from a water film of ½ mm. With the branch plug GAZ1, more water sensors can be connected at the same time. A cable extender of 2m, 5m, and 10m can be supplied.

Alarm activation:

> In case of alarm, the magnetic valve closes, the buzzer sounds, and the machine connected to the GEWAS191AN is also disconnected (unipolar disconnection)

Connector housing with electronics:

Closed housing (not for humid spaces), electronics, alarm bell, plug connectors for the solenoid valve and water sensor. Connector housing with contact protection of the plug connector, as well as contact protection of the power outlet. The contact protection of the power outlet is linked via GEWAS191N and through GEWAS191AN the alarm is triggered, that is, in case of an alarm the device disconnects up to 16A (resistive load) and 230V 50Hz.

Technical data

Power supply

220/240V 50/60Hz (control device)

Power consumption:

3 VA aprox.

Control output:

via power outlet on the device housing

Switching voltage:

corresponds to the supply voltage

Switching current

max. 16 A (resistive load)

Magnetic valve:

max. working pressure: 6bar servo-driven

(Differential pressure input/output >0.5 bar)

Dimensions:

control device: 126 x 79 x 54 mm + 4 mm plug (L x W x H)

magnetic valve: 82 x 102 x 41 mm

Working conditions:

0 to 50°C, 0 to 90% r.H. (non-condensing)

EMV:

The device meets the fundamental protection requirements established in the council directive regarding legislation

of member states on electromagnetic compatibility (2004/108/EC).