Phosphine (PH3) Gas Detector Gasman (PH3)

dsingle gas detector for personal protection  

with data logger, software, and data cable 

ATEX II 1G EEx ia IIC T4 / ATEX II 2G EEx ia d IIC T4 (EEx ia (d) IIC T3/T4)

This budget gas detector has been designed for applications requiring protection against a specific, flammable, or toxic gas. The Gasman gas detector is a unique gas detector (you will see the selection of gases later). The Gasman alerts its user with a piercing alarm tone and an optical signal (useful in case of loud noises in the environment) of the presence of dangerous gas concentrations and displays the current gas measurement value on the screen. Additionally, with this gas detector, you can save the measurement values and, if desired, transmit and analyze them on a computer. For this, it is necessary to have the software. The data logging will allow you to save all measurement values in the gas detector with a measurement rate of 1 minute. The log can record 900 hours of data at 1-minute intervals (54,000 records). The data saved in the gas detector can be transferred to a computer or laptop at any time for further analysis.

The gas detector can be calibrated and certified according to DIN ISO. It has also been tested according to the latest guidelines (directriz 94 / 9 / EG y disposición sobre la protección contra explosiones (ExVo)). Two recalibrations can also be performed per year. You choose the sensor (e.g. for which type of gas) with which the device should be equipped. You can choose from various types of sensors for different gases.

The gas detector complies with all European and international standards, including ATEX regulations.

Another special use is the measurement of ozone concentration, therefore this small gas detector can be complemented with an ozone sensor. The required ranges and alarms may vary by country and application, which can be configured as needed. Each gas channel can have two levels of instantaneous alarm set. Toxic gas units also have time-weighted average (TWA) alarms.

- Alarm level freely adjustable via software, vibrating alarm, with LEDs, high-pitched beep

- Comfortable to wear all day

- Its internal safety allows it to be used in Ex zones

- Regular OK control tone

- Solid housing

- Water and dust resistant IP 65

- LCD screen with backlighting

- Internal calibration via software

- Data logging

- Windows compatible software for quick and easy device configuration and

  to read the internal memory as an optional component.

- The connection to the PC is made via the interface cable (the base is also required)

  interfaz).

The Gasman gas detector has a vibrating module that alerts even in very noisy environments through vibrations.

If you equip the gas detector with the internal data logger function and want to transmit the saved values from the device to a PC after taking a measurement, you will need the combined charging station (charging station and interface at the same time).

Attention: the aspiration of chlorine, nitrogen dioxide, and ozone is not allowed in hard-to-reach areas.

Technical specifications (gases to choose from) 

Typical measurement ranges and alarm settings

Parameter / Gas

Symbol  

Rango

Alarma

Other gases

Fosfina*

PH₃

0 ... 5 ppm

0,2 ppm

 * With chlorine and nitrogen dioxide, the vacuum pump cannot be used to suck air in the Gasman II gas detector.

Sensores

(sensors can be exchanged)

Response time (T90)

Duration

Toxic substances

20 s

3 years.

Acoustic alarms

- 95 dB (A) at 1 m distance (adjustable tone)

- Regular control tone, can be disconnected

  mediante el software opcional

- Prolonged tone in case of low battery in 

  the gas detector.

Optical alarm

- Notable alarma visual doble roja / azul

- Alarm type indicator on the screen

- Green LED with low flashing frequency

  as an operational indicator 

Alarma vibratoria

- In addition to the acoustic and visual alarm, the device-

  Mouse includes vibration alarm

Auto-zero function (zero setting)

to adapt the gas detector to different measurement environmental conditions (activate the function always in clean air)

Pantalla

- High-contrast LCD with backlighting.

- 10 mm lines to indicate gas value

- Symbols for: Max Hold, Batt Low, calibrate-

  zero point calibration, alarm 1 and 2, 15 min and 8 h,

  alarma TWA

Memory of measurement values

Adjustable memory range.

Data records 54,000 (e.g., 900 h at 1-minute intervals)

Event log 4,800

Power supply

Toxic gases and oxygen

- disposable lithium battery

- up to 2 years under normal usage conditions

(rechargeable battery option)

Condiciones ambientales

-20 ... +65 °C / 0 ... 90 % H.r. without condensation

Housing class

IP 65

Dimensions

90 x 48 x 24 mm 

Peso

Toxic gases 118 g

Standards/Codes

EN 50014, EN 50020, EN 50018, EN 55022 

class B, EN 50081-2, Ex 95C2348X, Ex 65C2349, Ex 95Y1350, IEC 801-3, EN 50082-2, IEC 61508, EN 61779, EN 50721

Authorization

Europa:

Toxic/O_2: ATEX II 1G ia IICT4 Ga 

(-20 ≤ Ta ≤ +65 ºC)

Inflamables: ATEX II 2G EEx ia d IIC T4

(-20 ≤ Ta ≤ +65 ºC)

Internacional:

Toxic/O_2: IECEx BAS05.0039

Inflamables: IECEx BAS05.0038

Nota: 

The CO2 sensor is not ATEX certified

Interface for PC

You can request as an optional component standard software to configure, calibrate, and adjust alarm limits and the data logger function (optional) to read the measurement values saved in the gas detector. This software represents the data in graphical or tabular form. They can be exported to other programs.

Please note:

The combined charging station serves as an interface for data transmission, meaning the station is used to charge the gas detector batteries for 'flammable gases' + 'oxygen' and as an interface for the PC for the rest of the models.

Maintenance and recalibration

You can send us the gas detector for maintenance and recalibration considering the instructions in your company's internal ISO manual (for example, twice a year).

The gas detector is disassembled, cleaned, and recalibrated. If a sensor can no longer be calibrated or its validity period has expired, you will receive the corresponding information. Replacement sensors can be found in our online offer.

Production regulations ATEX (unofficially also known as "ATEX 95" due to Art. 95 of the EG directive on the free movement of goods) of the European Parliament and Council for the approximation of Member States for gas analyzers and protection systems for use in explosion risk areas, sets the standards for placing products used in those sectors on the market. This regulation took into account non-electrical devices for the first time. For example, rotary couplings can ignite due to unforeseen overheating. The purpose of this regulation is to protect people working in areas with explosion hazards. The regulation contains in Appendix II the basic health and safety requirements that the manufacturer must take into account and that must be verified with the corresponding CE conformity marking.

Contents of the shipment 

1 x Gas detector Gasman with data logging

1 x Alligator Clip 

1 x Lithium battery

1 x Calibration adapter 

1 x Instructions for use 

1 x Factory calibration certificate

Software

Software for the gas detector to transmit or store data on a computer or laptop.120 US$ 

Cargador

Charger for Gasman-N … 120 US$ 

Cable de datos

RS-232 interface cable for connecting the charger for data transmission to your PC ......56  US$ 

RS-232 to USB adapter

RS-232 to USB adapter that may be needed to transmit data to a PC …56 US$ 

Suction pump for Gasman N

This hand pump equipment is used if it is necessary to determine gases in very difficult areas... 110  US$ 

Data interface with cargador

The interface has two functions: 1. It is essential for data transmission from the detector of …200 US$