Shore A durometer PCE-DX-AS

Mechanical durometer for measuring the hardness of soft elastomers / with drag needle for better peak value reading

The durometer is used for measuring the surface hardness (Shore A) of soft rubber and very soft plastics. The Shore durometer is made of a single piece with a measuring head and a glare-free dial of 360º. The durometer can be calibrated at any time, and an ISO certificate is attached (additional cost). For better peak value reading capability, the meter additionally has a drag needle that remains stationary at the maximum measurement point. After reading, it can be reset to zero. With the PCE-DX-AS model (Shore A), you will always obtain hardness measurement values of maximum precision and reproducibility. 

In the following link, you will find an explanation of the hardness measurement process. You can also see the classification of different hardness grades by clicking here.

- with drag needle

- reading of different hardness units

- 360º clock

- high precision

- a small case is included

- optionally, an ISO calibration certificate can be issued

Technical specifications

Pressure force

0 ... 12,5 N

Penetration body

35º (according to Shore A)

Clock diameter

57 mm

Longitud total

110 mm

Indication range

0 ... 100

Measurement range

10 ... 90 (below 10 and above 90 decreases accuracy)

Error limit

±2

Scale division

1

Drag needle

Sí

Peso

160 g

Contents of the shipment

1 x Shore A PCE-DX-AS Durometer with drag needle

1 x Case

1 x User manual