Shore D durometer PCE-DDD 10

digital durometer for measuring the hardness of hard rubber, thermoplastics (in general), with USB interface and software

The PCE-DDD 10 durometer (Shore D) for thermoplastics is used both as a handheld device for on-site measurement and for checking material in a laboratory. The durometer features a measurement component with a sensor and a digital display with a reading accuracy of 0.1 hardness units. The PCE-DDD 10 durometer has a PC interface that allows data transmission to a PC. With the help of the USB cable and the included software, you can easily document and analyze the series measurements taken.

- Complies with current regulations for testing-

   Hardness scales

- Data transfer to a PC or laptop

- Suitable for individual and batch measurements

  serie

- On-site or laboratory measurement

Technical specifications

Measurement range

0 ... 100

Measurement accuracy

± 1 degree of hardness

Resolution

0.1 degree of hardness

Type of measurement

Spring load

Diameter of the spring support of the penetrating body

1,25 ± 0,1 mm

Upper diameter of the penetration body

0,1 ± 0,01 mm

Conicity angle

35 ± 0,25°

Memory capacity

500 mediciones

Unidades

Hardness grade

Ambient temperature range

0 ... +50 °C

Ambient humidity range

20 ... 85%

Dimension

153 x 50 x 29 mm (parte principal instrumento)

Peso

170 g 

Power supply

Rechargeable Ni-MH battery 3.6 V 

Max. operating duration

Approx. 20 h with one battery charge

Charging time

3 h aprox.

Compliance with standards

GB/T 531.1, ISO7619-1, ASTM D 2240

Contents of the shipment

1 x Durometer PCE-DDD 10 

1 x Network component 

1 x Case 

1 x Standard calibration plate 

1 x Cable mini USB 

1 x CD with software 

1 x Calibration certificate

1 x Instrucciones