Impact Tester PCE-1000

impact tester for metallic materials

Our portable impact tester is used to quickly and independently check the surface hardness of metallic materials. In the metallurgical sector, it is very important to know the hardness of the material used and to verify the hardness data provided by the manufacturer. The impact tester provides Rockwell B & C, Vickers HV, Brinell HB, Shore HS, and Leeb HL parameters. 

This impact tester is very useful in production, quality control, and technical service due to its mobility. Its compact design and battery operation make this device very easy to use. The PCE-1000 impact tester can be used in all positions and does not have data transmission to a PC or internal memory.

Advantages:

- Pocket format, takes up little space.

- Measures all the usual parameters.

- Integrated / wireless impact instrument

- Wide measurement range

- High precision

- Possibility to measure in any position

- Battery and charger included

- Wide variety of optional adapters

Measurement principle of the impact meter:

The dynamic measurement procedure uses the difference between the rebound speeds of a small impact body. This is launched in the impact instrument by means of a tensioned spring to the surface of the metal piece. 

This procedure was developed in 1978 by Mr. Leeb, from which the name of the Leeb hardness unit (HL) comes.



El impactometro puede utilizarse para:

Steel, cast steel, cold-formed steel tools, stainless steel, cast iron (gray cast, with spheroidal graphite), aluminum, alloys, brass, bronze, copper, forging alloys.



Measurement conditions:

- Minimum measurement surface 10 mm x 10 mm

- Minimum radius of curvature of the measuring surface r = 30 mm without adapter,

  with screwable adapter with V-slot, the minimum curvature radius is 11 mm

- Workpieces weighing less than 5 kg and thin wall thickness (< 5 mm) should be

  place a solid base before using the impact tester

- Workpieces weighing less than 2 kg must be placed on a solid base with paste of

  acoplamiento.

Technical specifications

Measurement ranges

HRC

HRB

HB

HV

HSD

Acero/ hierro

20 ... 67,9

59,6 ... 99,5

80 ... 647

80 ... 940

32,5 ... 99,5

Herramientas

20,5 ... 67,1

80 ... 898

Acero noble

19,6 ... 62,4

46,5 ... 101,7

85 ... 655

85 ... 802

Fundido gris

93 ... 334

Grafito esferoidal

131 ... 387

Aluminum alloy

30 ... 159

Brass

13,5 ... 95,3

40 ... 173

Bronce

60 ... 290

Cobre

45 ... 315

Hardness scales

HL, HRC, HRB, HB, HV, HSD

Types of material (with adjustment possibility)

STEEL (acero)

CWT. STEEL (cold molded steel)

STAIN. STEEL (acero inoxidable)

GC. IRON (fundido gris)

NC. IRON (cast with ductile granite)

C. ALUMIN (cast aluminum)

BRASS

BRONZE (bronce)

COPPER (cobre)

Accuracy

± 6 HL for HL = 800 (0.8%)

Percussion instrument

Tipo D (integrado)

Maximum hardness

940 HV

Radius of the workpiece (convex / concave)

R min = 30 mm (with component 10 mm)

Minimum weight of the workpiece

5 kg without base

2 ... 5 kg with base

50 g ... 2 kg with base and coupling paste

Minimum thickness of the workpiece

3 mm with coupling paste

Minimum tempering penetration

0,8 mm

Power supply

Rechargeable 9V DC battery

Charging time

12 h

Maximum workpiece temperature

+ 120 °C

Temperatura ambiental

0 ... + 50 °C

Dimensions

100 x 60 x 33 mm

Peso

150 g

Contents of the shipment

1 x Impact meter PCE-1000

1 x Elastic pin 1 x Test block

1 x Cargador

1 x Cleaning brush

1 x Case 

1 x User manual.