Video Endoscope VIS 200

Battery-powered video endoscope with 7" screen / 

cable length of 20 m

The VIS 200 video endoscope serves both for simple and independent analysis of the fault point network in wastewater pipes, as well as for controlling downpipes and exhaust gas ducts from a diameter of 26 mm. The equipment supplied with the video endoscope in a double-rigid case is compact, powered by a battery, and stands out for its simple handling as well as its high availability. The VIS 200 video endoscope measures lengths using a push tube with length marking, while the VIS 250 has electronic footage control. Additionally, with the VIS 250 video endoscope, the inspection process can be recorded as a video and documented thanks to an integrated memory. Photographs can also be taken and stored by pressing a button. Both devices have a waterproof head equipped with 12 LEDs, which ensure accurate inspection. Since the camera head can only pass through pipes of 40 mm, optical analysis with an endoscope has never been easier. The VIS 250 video endoscope, along with the digital footage control, has a function that can show at any time where the top and bottom are and at what degrees the camera is directed up or down. Furthermore, the VIS 250 video endoscope can be economically located by radio, for which it additionally requires the L 200 locator, which further facilitates the exact location of fault points in pipes. The L 200 locator can be easily attached to a telescopic rod and then guided along the floor, on a wall, or under the ceiling. The video endoscope locator measures the long radio waves from the camera head, while the user is guided throughout the process by the clear color display and acoustic signal to the section of pipe that needs to be repaired. Once the affected section of pipe has been found, you can mark where the fault point is using one of the chalk holder supports located at the end of the locator. The TFT monitor of the video endoscope is foldable; for hard-to-reach places, you can remove the monitor from the case (cable length 2 m).

- Camera head with Ø of 26 mm

- Water-resistant and extremely flexible head

- Sensibilidad a la luz: 0,5 lux

- Clear LED lighting

- Very bright 7" TFT color monitor

- 20 m long sliding cable

- Battery for 2 hours of operation

- Double-rigid robust case

- Data exchange via mini USB

- Integrated video output

- Localizador L 200 opcional

Technical specifications

Pantalla

Housing dimensions

176 x 114 x 32 mm

Pantalla TFT

Formato 7" / 16:9 (17,78 cm)

Salida / Video Out

FBAS signal (Chinch)

Peso

400 g

Power supply

1 rechargeable NiMH battery of 12 V or power cable

Battery life

max. 2 accumulators each 120 min = 4 h

Mini camera head

Sensor type

1/3" COLOR CMOS

Resolution

420 lines

Pixels

768 x 576 (PAL), 656 X 492 (NTSC)

Light sensitivity

0,5 lux

Objetivo

f = 2,3 mm, F = 2,5

Field of view

115º

Lighting

12 LEDs blancos

Type of protection

Water-resistant, sealed according to IP 68 

(type of protection)

Dimensions

Ø 26 x 38 mm

Peso

240 g

Temperatura operativa

0 ... +40 ºC, max. 95% H.r.

Storage temperature

-20 ... +50 ºC, max. 95% H.r.

Double rigid case

Dimensions

51x 43 x 17 cm

Peso

7 kg

Locator receipt (optional)

Pantalla

Graphical display of transmitter location

Output impedance

Auriculares

Tip. 32 ohmios

Power supply

3.7 Lithium-Ion battery

Temperatura operativa

0 ... +40 ºC

Storage temperature

-10 ... +40 ºC

Peso

605 g

Dimensions

32 x 14 x 7 cm

Length measurement VIS 200

Endoscopio VIS 200

Push tube with electronic metering control

Longitud

20 m

Diameter

6 mm

Contents of the shipment

1 x Video endoscopio VIS 200

1 x Color camera head Ø 26 mm V2

1 x Monitor a color TFT

1 x 2 m connection cable (removable monitor)

1 x 20 m sliding cable with Ø 6 mm

1 x Alfombrilla antideslizante

1 x NiMH Battery

1 x Cargador