Video Endoscope VIS 300

Battery-powered video endoscope with a 7" color monitor, 360º rotating head, and 180º swivel

The rotating head of the VIS 300 video endoscope ensures a complete view in hard-to-reach places. It makes dark areas visible. The small mobile color camera of the VIS 300 video endoscope allows for more possibilities in image analysis in narrow pipes, wells, and cracks. The lens provides a very sharp image when detecting cracks, defective welds, or joints. The head of both models, with a diameter of 40 mm, is small enough to fit into almost any space. Additionally, it rotates 360º around its axis and turns left to right 180º. This mobility allows for a new way to inspect defective water pipes, air ducts, false ceilings, or chimneys. Furthermore: The video endoscopes are bright, waterproof, and easy to handle. A single press and the equipment is ready. The images are sent to a color screen with excellent clarity. This allows you to detect and assess weak points. It also integrates a video output for image documentation. The power supply for the video system is provided by batteries; it is also possible to power it through a network component. A piece of equipment that should be part of your setup: The hard case integrates the camera, screen, and additional components. A special feature of this video endoscope is its Start function. If the corresponding key is pressed, the camera head automatically returns to its initial position. Additionally, the VIS 350 video endoscope can be economically located by radio; for this, it requires the L 200 locator, which further facilitates the exact location of fault points in pipes. The L 200 locator can be easily attached to a telescopic rod and then guided along the ground, on a wall, or under the ceiling. The locator of the video endoscope measures the long radio waves from the camera head, while the user is guided throughout the process by the clear color screen and acoustic signal to the section of pipe that needs to be repaired. Once the affected section of pipe has been found, it can be marked using one of the chalk holder supports located at the end of the locator.

- Rotating and swiveling head with a diameter of 40 mm

- Lighting 12 white LEDs

- Electronic counter

- Start function

- The optics rotate 360º on its axis and turn 180º from left to right, allowing for a wide view

- Optional radio localization

- 7" color display

Technical specifications

Pantalla

Housing dimensions

18 x 11,5 x 3 cm

Pantalla TFT

7,2" (18 cm) formato 16:9

Salida / Video Out

FBAS signal (Chinch)

Peso

400g

Power supply

2 replacement batteries each 12 V or power cable

Tiempo operativo

max. 2 accumulators each 120 min. = 4 h

Rotary and swivel head with a diameter of 40 mm

Cabezal mini a color

1/3 " COLOR CMOS

Pixels

785 x 576 (PAL), 656 X 492 (NTSC)

Light sensitivity

0,5 lux

Objetivo

f = 2,3 mm , F = 2,5

Image perception angle

115 °

Light source

12 LED's blancos

Protection

Water resistant IP 67 (protection type)

Dimensions

Ø 40 x 60 mm

Temperatura operativa

0 ... +40 ºC, max. 95% H.r.

Storage temperature

-20 ... +50 ºC, max. 95% H.r.

Locator transmitter

Transmission frequency

8,9 Hz

Push tube

Longitud

20 m

Diameter

Ø 6,5 mm

Double-rigid case

Dimensions

51 x 43 x 17 cm

Peso

8,2 kg

Length measurement

Tipo

Electronic counter

Resolution

0,04 m

Locator receiver

Pantalla

Graphical display of transmitter location

Output impedance

Auriculares

Tip. 32 ohmios

Power supply

3.7 Lithium-Ion battery

Temperatura operativa

0 ... +40 ºC

Storage temperature

-10 ... +50 ºC

Peso

605 g

Dimensions

32 x 14 x 7 cm

Contents of the shipment of the VIS 300 video endoscope in a double-rigid case

1 x video endoscope VIS 300 in double rigid case,

1 x rotary and swiveling head with a diameter of 40 mm,

1 x TFT color monitor in widescreen format

1 x 2 m connection cable,

1 x 20 m cable with Ø 6.5 mm,

5 x spare plastic protective housings,

1 x alfombrilla antideslizante,

1 x NiMH battery,

1 x cargador