PKT-1190 Digital Oscilloscope with Logic Analyzer

Osciloscopio registrador PKT-1190

digital recording oscilloscope with logic analyzer of up to 16 channels / bandwidth of 100 MHz / measurement sequence of 500 MS/s per channel / recording of up to 6000 points per channel / recording of measurement values directly to USB stick

The 100 MHz next-generation PKT-1190 recording oscilloscope from PeakTech features a 16-channel logic analyzer. Data visualization on the oscilloscope is done through an 8" color TFT display with good resolution and backlighting. Through the USB connection, you can transfer data to the computer at a higher rate and faster. Electronic devices are becoming increasingly complex, and the number of digital circuits and serial bus systems is growing. Since the test signal is often analog or digital signals, the user needs an analyzer that checks both analog and digital signals, as is the case with the PKT-1190 recording oscilloscope. It allows for application in training, service sector, and quality and protection systems. Measurement values can be stored directly on the USB stick. Its internal memory offers a capacity of up to 6000 points per channel. The different trigger modes of the PTK-1190 recording oscilloscope greatly facilitate work.

Osciloscopio registrador

- Direct connection for USB pen

- Sampling rate per channel: 500 MS/s in real time

- Maximum sensitivity: 5 ns

- Bandwidth 100 MHz

- Memory up to 6000 points per channel

Logic analyzer

- Bandwidth 66 MHz

- Up to 16 channels

- Input signal measurement range 0...5 V

- Memoria 4 M / canal

- Sampling speed of 1 S/s up to 400 MS/s

Technical specifications

Osciloscopio

Bandwidth

100 MHz

Pantalla

20 cm, 8" TFT (640 x 480 pixels)

Canales

2 channels + external trigger + logic analyzer

Recording of measurement values

Real-time sampling rate

500 MS/s (real-time) per channel

Measurement sequence

normal, valor pico, promedio

Componente horizontal

Base temporal

ns - 100 s / div

Componente vertical

Sensibilidad

2 mV ... 10 V / div

Input coupling

DC, AC, GND

Input resistance

1 MΩ ± 2 % in parallel with 15 pF ± 3 pF

Maximum input voltage

400 V/DC and AC

DC accuracy 3%

3 %

Transductor A/D

8 bit

Rising flank

< 3,5 ns

Trigger component

Trigger mode

flank, video, alternate, mains supply

Measurement functions

Automatic measurements

20 parameters

Mathematical waveform

suma, resta, invertido

Memoria

Memory function

max. 6000 points (1 channel)

Waveform memory

4 waveforms

Logic analyzer

Bandwidth

66 MHz

Canales

16

Sampling speed

1 S/s up to 400 MS/s

Input resistance

1 MΩ ±2 %

Input signal measurement range

0 ... 5 V

Voltage limit value

0 ... 4 V (4 ajustes)

Trigger mode

flanco, bus, status, sincronizado, disparo (trigger)

Trigger position adjustment

before, center, after

Memoria

4 M / canal

Memory settings

10

Data systems

binary, decimal, and hexadecimal system

Specifications generales

Power supply

AC 100 ... 240 V AC / 50 Hz

Dimensions (ancho x alto x profundidad)

370 x 180 x 120 mm

Peso

2,1 kg

Contents of the shipment

1 x Osciloscopio registrador PTK-1190

2 x Probes with BNC connection

1 x Cable USB

1 x Software

1 x Connection cable

1 x Probe tip

1 x User manual