Galvanically Isolated OX7204-CSDO Oscilloscope

handheld digital oscilloscope with memory / 4 channels with galvanic isolation / bandwidth 200 MHz / sampling rate 100 GS/s / 5.7" TFT color LCD display

The OX7204-CSDO oscilloscope is a combination of a 4-channel recording oscilloscope (inputs with galvanic isolation up to 600 V CAT III), a True RMS multimeter, an FFT analyzer, a harmonic analyzer, and a data logger. With a bandwidth of 200 MHz, the OX7204-CSDO oscilloscope covers a wide range of applications, from electronics to laboratory applications, construction office, maintenance services, etc. In addition to the higher bandwidth of 200 MHz, the OX7204-CSDO oscilloscope has a higher sampling frequency of 2.5 GS/s per channel in SingleShot mode, and 100 GS/s in repetitive mode. The 12-bit A/D converter provides a high input dynamic of 156 µV/div to 200 V/div. Both in oscilloscope mode and multimeter mode, measurements can be triggered through the touchscreen at a certain signal level. This allows for better analysis of signals or events, and searching for specific conditions based on level or duration.

- RS-232, centronics, ethernet, and USB interface

- Bandwidth 200 MHz

- Registrador

- Sampling rate per channel: ETS 100

  GS/s Single Shot 2,5 GS/s

- Mathematical functions

- RS232 / Centronics / Ethernet / USB / 

  micro SD memory card

- TRMS multimeter up to 200 kHz

- 5.7" color touch TFT LCD screen

- Analizador FFT (opcional)

- Harmonic analyzer

- Memory of 50,000 points per channel

- 12-bit D/A transducer 

  (resolution Y 0.025%)

- Automatic "Plug and Play" identification of

   probes and adapters

- NiMH battery up to 4 hours

Technical specifications

Modo osciloscopio

Bandwidth

200 MHz

Bandwidth limitation to 

15 MHz, 1.5 MHz and 5 kHz

Pantalla

11,5 x 8,6 cm, 5,7" TFT LCD a color 

(320 x 240 pixels) with touchscreen

Canales

4 (galvanic separation)

Deviation X

Base temporal

1 ns - 200 s/div; Accuracy ±0.1%

Y deviation

Sensibilidad

2.5 mV ... 200 V/div; Accuracy ±0.1%

Disparo (trigger)

Types of trigger

AUTO, TRIG, SingleShot, Autolevel 50%

Trigger mode

Edge, pulse width (20ns - 20s), phase shift (120ns - 20s), event counting. 

(3 to 16.384), image or TV row (NTSC: 525 or PAL: 625) - free adjustment of the trigger position

Memoria digital

Max. sampling rate.

100 GS/s in ETS - 2.5 GS/s in SingleShot 

(in each channel) - 12 bit D/A transducer (resolution Y 0.025 %)

Memoria

50.000 puntos/canal

User memory

2 MB + micro tarjeta SD

Types of indications

Glitch Mode 2ns, envelope curve, 

average value, X/Y presentation

Other functions

FFT analysis and mathematical functions

FFT (lin or log) with measurement cursor - basic arithmetic functions +, -, x, / and 

mathematical formula editor

Cursores

2 or 3 cursors: V and T simultaneously or phase

Resolution 12 bit, indication with 4 digits

Automatic measurements

19 measurements of time or level, phase measurements, phase resolution 12 bits, indication with 4 digits

Multimeter mode

General information

8000 digits + max. and min. bar graph - TRMS - graphical logging with date and time

AC, DC, AC+DC voltage

600 mV ... 600V TRMS, 800 mV ... 800 V DC - accuracy: V DC 0.5% + 5 digits - bandwidth 200 kHz

Error detection through the display

Error duration adjustment - logs up to 100 errors with date/time as .txt file

Resistencia

80 ohms to 32 MOhm - accuracy 0.5% of the measured value + 25 digits

Other types of measurement

Temperature, capacitance (5 nF ... 5 mF), frequency (0 ... 200 kHz), diode test 3.3 V

Harmonic analysis mode

Multichannel analysis

Up to order 61 - basic frequency of 40 ... 450 Hz, automatic or manual

Simultaneous measurements (voltage/current)

Total RMS value, THD, and selected order (% dominant wave, phase, frequency, RMS value)

Power 

(single-phase and three-phase symmetrical networks)

Harmonic wave analyzer in apparent power, with indication <received/emitted> for each order

Modo registro

Duration - Measurement share

From 2 s to 1 month

From 800 µs to 18 m

From 40 µs to 53 s

(with memory extension)

Storage conditions

Threshold value or tolerance window, simultaneous conditions on multiple channels, selectable duration starting from 160 s

Record analysis

Scale and unit of measurement, automatic measurements or measurements taken with the cursor, error detection with date/time, zoom, etc.

Printing

Via ethernet, RS-232 or Centronics (optional)

Network connection

Ethernet

Power supply

98 ... 264 V / 47 ... 63 Hz, 15 W; 

acumulador NiMH

Electrical safety / EMC

Electrical safety according to IEC 61010-1 (2001)

EMC according to EN 61326-1 - 600 V, CAT III

Other data

Dimensions: 265 x 195 x 56 mm

Weight: 1.9 kg with battery

Protection type: IP41

Contents of the shipment

1 x 4 x 200MHz oscilloscope with color touchscreen

1 x Power supply and pointer

4 x Sondas 1/10 PROBIX

1 x PROBIX adapter for BNC

2 x PROBIX adapters for 4mm banana plugs

1 x Set of R+N CAT III - IV test leads and probes

1 x Transport case

1 x Crossed ETHERNET connection cable

1 x USB connection cable

1 x Programa SX-METRO/P

1 x uSD memory card