ScopeMeter Oscilloscope FLUKE 125/S

Robust oscilloscope with bandwidth up to 40 MHz /

2 channels / with multimeter

The FLUKE 125/S ScopeMeter oscilloscope is a robust tool for fault location in industrial environments. The oscilloscope is a truly fascinating device that integrates an oscilloscope, a multimeter, and a 'paperless' recorder into a single, affordable, and easy-to-use unit. The ScopeMeter is ideal for measurements on machines, instruments, control loops, and power supply systems. The oscilloscope bandwidth can be up to 40 MHz. In addition to oscilloscope mode, the FLUKE 125/S ScopeMeter has a TRMS multimeter function. The robust construction of the ScopeMeter ensures that the oscilloscope withstands the tough daily routine in the industry. Oscilloscope users know how difficult it can be to adjust the trigger. Incorrect settings lead to unstable and sometimes false results. The unique Connect-and-View function of the FLUKE ScopeMeter detects signal samples and automatically adjusts the correct trigger parameters. It ensures stable, reliable, and reproducible indication, regardless of the type of signal measured – even in motor drives and control signals – without touching a single key on the ScopeMeter. The FLUKE 125/S ScopeMeter integrates a data logger. With the 'paperless' logger, you can record maximum, minimum, and average values for 16 days (FLUKE 120 series). All ScopeMeters feature the FLUKE TrendPlot™ function. The oscilloscope has a cursor measurement function. In addition to this function, there are over 26 measurement functions installed in the ScopeMeter. The bus stability mode of the ScopeMeters provides a clear 'good/bad' indication for electrical signals. Especially in bus systems and industrial networks like CANBus, ProfiBus, RS-232, and many others, the ScopeMeter is an indispensable tool. The FLUKE 125/S ScopeMeter monitors the quality of electrical signals as they can be transferred via bus systems. In addition to bus system measurements, the FLUKE 125 ScopeMeter can perform power measurements and harmonic analysis. Power measurement and harmonic analysis with the ScopeMeter can be performed on single-phase and symmetrical three-phase systems. The ScopeMeter has certified safety according to CAT III up to 600 V according to EN 61010-1. The FLUKE 125/S ScopeMeter comes with multiple accessories. The ScopeMeter's NiMH battery allows safe operation for up to 7 hours. Through the optical interface and additional components, measurement values can be transferred from the ScopeMeter to a computer.

- 40 MHz two-channel digital oscilloscope

- 2 true RMS digital multimeters with 5,000 counts

- Automatic measurements

- TrendPlot™: two-channel recorder

- The simplicity of Connect-and-View™ trigger for "hands-free" operation

- Shielded test cables for oscilloscope modes, resistance measurements, and continuity

- Battery life: up to 7 hours

- Safety rating CAT III 600 V

- Optically isolated interface for connection to PC

- Measurement functions of VDC, VAC, VAC+VDC, Ohms, Continuity, Diode testing, Current, °C, °F, Capacitance, dBV, dBM, Crest factor, Touch Hold, and Zero adjustment

- Compact and very robust equipment

Technical specifications about the ScopeMeter ® FLUKE 125/S oscilloscope

ScopeMeter ®

FLUKE 125/S

Bandwidth

40 MHz

TRMS multimeter measurement functions with 2 channels

VDC, VAC, VAC + VDC, ohms, continuity, diode check, current, °C, °F, capacitance, dBV, dBm, crest factor, Touch hold, zero adjustment

TrendPlot Logging (trend printing)

Automatic vertical scale and temporary compression.

Display of actual readings of minimums, maximums, and averages

Cursor

ΔT, 1/ΔT, V, ΔV, rise/fall time

Max. real-time sampling rate

25 MS/s

Equivalent sampling speed

up to 2.5 GS/s

Channels and digitizers

2

Time base range

10 ns/div ... 1 min/div

Input sensitivity

5 mV/div ... 500 V/div

Types of trigger

Connect-and-ViewTM, free run and individual deviation, edge, video, external

Peak capture

40 ns

Oscilloscope measurements

26 automatic, W, VA, VAR, and PF for single-phase and symmetrical three-phase networks

Harmonics mode

33. order up to 60 Hz

24. order up to 400 Hz

Maximum recording length

512 min/max points per input

Memoria

20 displays and settings

Temperatura operativa

0 ... +50 ºC

Storage temperature

-20 ... +60 ºC

Working height

3000 m

Electrical safety

600 V CAT III (EN 61010-1)

Dimensions

232 x 115 x 50 mm

Peso

1,2 kg

Warranty

3 years (device)

1 year (accessories)

Battery life

7 h

Acumulador

NiMH

Interfaz

Optically isolated RS-232 port

Contents of the shipment of the ScopeMeter ® FLUKE 125/S oscilloscope

1 x Osciloscopio ScopeMeter ® FLUKE 125/S

1 x AC120 Alligator clips

1 x BB120 Adaptador tipo banana a BNC

1 x STL120 Shielded test lead set

1 x VPS40 Voltage probe, 40 MHz, 10:1

1 x HC120 hook clamp set

1 x Multimeter test lead set TL7S

1 x Rechargeable battery BP120MH NiMH

1 x PM8907 Battery charger/line voltage adapter

1 x Start-up manual

1 x User Manual (CD-ROM)

1 x C120 Hard case

1 x OSC4USB Cable interfaz

1 x SW90W Software FlukeView (ScopeMeter)