DIN Rail Power Supply PS24V14AA

Single-phase input of 115 V AC to 230 V AC

Output: 24 VDC, 14 A at 60 °C operating temperature

flexible output power from 240 watts to 336 watts

Durable metal case with DIN rail mounting

High overload without stopping

3 different protection modes for the output

Product details

 

input:

nominal input voltage: 115 VAC to 230 VAC.

Input voltage: 90 VAC to 135 VAC (115 VAC);

170 VAC a 264 VAC (230 VAC)

Frequency range: 47 to 63 Hz

Input current (V and at 40 °C) I²t: msec ≤42A ≤5

Input current (115 VAC to 230 VAC): 4.4 A to 2.2 A

fusible interno: Un T6,3

fusible externo (recomendado): 16 A (BCharakteristik)

 

salida:

The factory-adjusted output voltage (Vn) +/- 3%: 24 VDC

adjustable output voltage range (Vadj): 22 VDC to 27 VDC

Start with a large load (capacitive load): ≤50,000 uF

Delay after supply application: (max.) 1 sec.

corriente continua a 24 V CC <40 ° C (In): 14 A (permanente)

corriente continua a 24 V CC <50 ° C (In): 12 A (permanente)

corriente continua a 24 V CC <60 ° C (In): 10 A (permanente)

Current power supply at 24 VDC / 60 °C (In): At (60 °C) 1.5 x ≥3 min.

Max Power in overload over 4 VDC. (Perm.): Imax = At 60 ° C x (1.8 to 2.2)

. Actual Max in short circuit (Isc): At (60 °C) x 3

Max 2 segundos:. Modo hipo

Permanente: Modo continuo

Time retention of 24 VDC 5 A (min VAC.): Typically 20 milliseconds

Remaining ripple: ≤80 mVpp

Eficiencia: ≥89%

Overheating protection: Yes, turn off the output and automatic reset of the module.

Short circuit protection on the output (via bridge):

hypo mode A. (cyclic clocking the output to short circuit elimination)

modo continuo B.

C. RESET when recreating power (output is deactivated will restart until the power supply)

maximum power dissipation: 42 W

Overload protection: Yes

Surge protection on the output: Yes (typical 35 V DC)

Possible parallel operation: Yes

relé de protección: salida de relé tensión 10% inferior; 1 A @ 30 VDC

 

aislamiento:

isolation voltage input / output: 3000 VAC

Input / PE insulation voltage: 1605 VAC

voltage output Isolation / PE: 500 VAC

 

Standards and certifications:

CE according to EMC, UL approval according to UL508, compatible with RoHS

 

fiabilidad:

MTBF according to IEC 61709 > 500,000 hours

 

protection:

IP20

 

la vivienda:

Robust metal housing.

Dimensions: W 72 mm x H 115 mm x D 135 mm.

DIN rail mounting.

 

connection:

Fixed terminal blocks with 2.5 mm² cross-section.

 

Humedad relativa:

max. 95%. RH at 25 °C, without condensation.

 

Temperatura ambiente:

Operation: -25 °C to 70 °C

(> 60 ° C leads to a

The reduction of operating values of 2.5% / °C).

Almacenamiento: -40 ° C a 85 ° C.

 

peso:

650 g

 

Supply volume:

Device operating instructions.

More information: